You’ve probably encountered furnace issues and are considering replacing your furnace if you’re reading this post. While many publications offer hazy prices for replacing your furnace, it might be difficult to locate something that takes you step-by-step through the procedure.

This article provides you with the knowledge you need to calculate the typical furnace replacement cost and some crucial elements to consider before you make a decision.

Costs of Installation

You should consider your installation costs before making hasty decisions regarding which furnace brand or design you want to install. 

Many individuals are unaware that sometimes the cost of installing a new furnace can be as much as the cost of the furnace.

The time and labour needed to remove your old furnace and install the new one will also determine the average cost to replace a furnace because most furnace installers bill by the hour. 

It makes sense that the cost of installation will increase as more work is necessary and as the replacement of your furnace takes longer. 

Even though the majority of HVAC businesses might not be able to give you an exact price, a skilled HVAC technician should be able to give you a good idea of what removal and installation would cost. In this manner, you can consider this expense when making a choice.

Furnace Type

The total cost of replacement will depend on the type of furnace you select. Low-Boy furnaces typically stand between one and two feet shorter than High-Boy furnaces. Oil is often needed as a fuel source. 

An oil furnace often costs more on average to replace than other types of furnaces. This is due to the higher cost and longer installation time associated with an oil furnace.

Because they don’t need furnace vents, electric furnaces may be less expensive to install and replace. Gas and oil furnaces need to be vented outside of your house in order to get rid of any potentially hazardous gases because they burn combustible material as fuel. 

The additional time, labour, and materials needed for this venting can raise the price of a replacement.

Furnace Installation Considerations

The final cost of replacement will depend on the furnace’s brand, size, and efficiency rating.

Square Footage of a Home

Although it may seem obvious, your furnace has to be bigger the bigger your home is. Installing a furnace that is too small but slightly less expensive in an effort to save money won’t be beneficial in the long term. 

Your furnace’s blower will probably work too hard and eventually need to be changed more frequently, raising your yearly maintenance expense. You’ll probably spend more money on a blower replacement than you initially saved by installing a tiny furnace.

Performance Level

There is a specific efficiency rating for each type of furnace. Although they may cost more upfront, high-efficiency furnaces typically pay for themselves over time. Better total energy savings are provided with a high-efficiency furnace. 

As a result, even though they initially cost roughly $500 more than a low-efficiency furnace, they will ultimately result in yearly energy bill savings for you.

Brand of Furnace

Choosing a famous, well-known brand today offers a quality assurance similar to that of many other products. While the cost of brands like Trane, American Standard, Carrier, and Bryant may be slightly higher, knowing that the company will support its goods allows you to buy with trust. 

These firms create high-quality, dependable, and long-lasting furnaces, but the majority do cost more.

Conclusion

Some lesser-known manufacturers are also capable of delivering the same level of functionality and quality. Inquire about recommendations and extra information from your neighbourhood HVAC expert.

You’ll want to have your furnace installed by a qualified professional. You can be sure that your new furnace will bring you years of satisfaction by paying attention to the advice given here.

When you’ve decided to get a replacement, don’t hesitate to call Climate Experts for your furnace installation in Pickering! We’re a Canadian-owned and -operated company, installing, servicing, and maintaining all major brands of furnaces and air conditioners. 

Call us anytime, as we’re available to serve you with 24/7 emergency service!

As a pet owner, you know that your furry friend is an important part of the family. But did you know that your pet can have an impact on your home’s HVAC system? Pets can shed fur, track in dirt and mud, and cause allergies. While you can’t control everything your pet does, you can take steps to minimize the impact on your HVAC system.

So, if you have one or a couple of furry friends running around your home and an HVAC system installed in it, here are five tips you must follow to ensure your HVAC system is always in great condition:

1. Vacuum Regularly

Vacuuming is important for all households, but it’s especially important for homes with pets. Vacuuming regularly will help to remove pet hair, dander, and dirt from your floors and furniture. This will reduce the number of allergens in your home and also help to keep your HVAC system clean.

2. Brush and Clean Your Pet Often

While you cannot fully eliminate shedding from your pets, brushing your pet regularly will help to reduce the amount of shedding that occurs. Cleaning them also helps to do this! As a result of cleaner pets, you will help to keep your home’s air clean and reduce the amount of fur entering your HVAC system and clogging up the filters.

3. Invest in an Air Purifier

If you’re concerned about the air quality in your home, investing in an air purifier is a good idea. Air purifiers can help to remove pet hair, dander, and other airborne allergens from your home and also alleviate the amount of work your HVAC system has to put up with.

4. Schedule Regular HVAC System Maintenance

The best way to protect your HVAC system is to schedule regular maintenance. A professional can clean the filters, coils, and other parts of your system. They can also identify any potential problems and make repairs as needed. This ensures that your HVAC system is always in good shape, even if you have a couple of dogs or cats who love to run around and shed a lot of furs.

5. Consider Investing in an HRV/ERV System

These systems help to recycle heat or energy in your home. What does this mean? It simply means that they can help improve your HVAC system’s efficiency greatly! In fact, an energy recovery ventilator can recover up to 70% of the HVAC’s energy use. Now that’s a huge amount. This can greatly reduce the workload on the HVAC system and, subsequently, keeps them in proper working order.

Conclusion

As you can see, some work needs to be done at your end to ensure that you and your furry friends all get to live in a comfortable and cozy home! After all, no one wants to live in a home that isn’t at the right temperature, right? That being said, apply the tips we’ve shared with you today, and the more tips you apply to ensure your HVAC system is in good condition, the better it is for the system and everyone else that relies on it.

Climate Experts is a Canadian-owned and operated company that serves the Durham region, offering installation, servicing, and maintenance for all major brands of HVAC systems. If you are looking for HVAC maintenance in Whitby and more, get in touch with us today!

The furnace’s air filter is designed to trap dust in the air. The filter needs to be cleaned and replaced regularly to work effectively.

In this post, our specialists in HVAC in Ajax are discussing what you need to know about reusable furnace filters and whether or not they actually work:

What Is a Reusable Furnace Filter?

A reusable furnace filter is a type of furnace filter that can be reused after it has been used to filter out particulates from the air. Reusable furnace filters are typically made of metal or synthetic materials, and they can be washed and reused multiple times.

Reusable furnace filters are an alternative to disposable furnace filters, which are designed to be used only once and then thrown away. Disposable furnace filters are made of paper or fiberglass and can only be used for a limited time before they have to be replaced.

Is It Necessary to Use High-Quality Furnace Filters?

There are various furnace filters on the market, and it can be tempting to save a few dollars by opting for a cheaper option. However, it’s important to remember that a furnace is a significant investment, and using a high-quality furnace filter is among the best ways to protect it.

What Is the Difference between Disposable and Reusable Filters?

When it comes to filters, there are basically two main types: disposable and reusable. Disposable filters are designed to be used once and then thrown away, while reusable filters can be used several times before needing replacement.

 Disposable filters are often made of paper or fiber, while reusable filters are usually made of metal or plastic.

Pros and Cons of Reusable Furnace Filters

Are reusable furnace filters really the best option for your home? Here’s a look at the pros and cons of using a reusable furnace filter:

PROS

1. Cost Savings

One of the biggest advantages of using a reusable furnace filter is the cost savings. These filters typically cost more upfront than disposable filters, but you won’t have to keep buying new ones every few months. In the long run, reusable furnace filters can save you a significant amount of money.

2. Environmentally Friendly

Another benefit of reusable furnace filters is that they’re more environmentally friendly than disposable filters. Once you’ve used a disposable filter a few times, it ends up in the landfill where it will sit for years. On the other hand, you can wash and reuse a reusable furnace filter, which cuts down on waste.

3. Better Air Quality

Some studies have shown that reusable furnace filters can actually improve the quality of the air in your home. That’s because these filters are designed to trap smaller particles than disposable filters. If you’re looking for better air quality, a reusable furnace filter is a good option.

CONS

1. Requires Regular Cleaning

One of the downsides of using a reusable furnace filter is that it requires regular cleaning. You’ll need to remove your filter from the furnace and wash it at least once every three months. If you don’t keep up with the cleaning, the filter won’t work as well and your air quality will suffer.

2. Can Be Difficult to Clean

Cleaning a reusable furnace filter can be a bit of a hassle, especially if it’s very dirty. You’ll need to use a mild detergent and make sure you rinse the filter thoroughly. If you don’t clean the filter properly, it could end up damaging your furnace.

How Often Should You Change Your Reusable Filter?

The answer to this question depends on a few factors, including the type of filter you have and the amount of use it gets. In general, however, most reusable filters should be changed every one to three months.

The type of filter you have will play a role in how often it needs to be changed. Also, the amount of use your air purifier gets will also affect how often you need to change the filter. If you use it often, you may need to change it more often than if you only use it occasionally.

Conclusion

Reusable filters are a good option for many reasons. They are cost-effective, eco-friendly, and easy to use. With so many benefits, it’s no wonder that more and more people are making the switch to reusable filters. If you need to know more about reusable filters, you can speak with experts in HVAC in Ajax who can answer your questions.

Climate Experts are the trusted specialists on everything related to HVAC in Ajax. Get in touch with Climate Experts for all your HVAC repair, maintenance, or installation needs!

If you always prefer having warm baths over cold ones, you’ve probably experienced the hassle of heating water in the kettle and mixing it with your cold one. That’s why tankless water heaters are more than perfect for households. After all, it reduces the effort of heating water by eliminating the need for a storage tank, making you save money on your energy bill.

How a Tankless Water Heater Works

A tankless water heater doesn’t use a storage tank to heat water. It warms the water as it passes through the system, which delivers it to the fixtures and appliances in your home. It works by detecting when a hot water tap is turned on and heating the water to the required temperature.

Afterward, the water heater continues to monitor the water flow and temperature so that it can adjust the heating as needed. As a result, you’ll never have to worry about running out of hot water, even if several appliances are being used simultaneously.

Signs of Tankless Water Heater Repair 

Like all appliances, your water heater can stop working properly for several reasons. If you’re unsure if you need tankless water heater repair or not, here are a few signs to look out for:

Sudden Loss of Hot Water

The primary goal of every tankless water heater is to provide hot water so you won’t have to wait long for your shower to heat up. This common issue is often referred to as “combustion shutdown,” where the venting of exhaust gases is obstructed. This can provoke the heater to shut down, leaving you with cold water.

You can do a few things to help prevent combustion shutdown in your tankless water heater. First, make sure the exhaust vent is clear and free of debris. You should also check the chimney or roof for any obstructions. If you have a gas water heater, keep the area around the unit clear and free of combustible materials.

The Water Is Not Hot Enough 

The water may not be hot enough because of mineral accumulation in the heating elements. Over time, mineral deposits will build up on the parts and reduce the heater’s ability to produce hot water. By utilizing a water softener or descaling the details periodically, you can help prevent this. 

Another tankless water heater repair method is to flush the system. This will remove any built-up sediment or mineral deposits and help improve the heater’s performance. 

Reduced Water Flow 

A decreased water flow could be due to several factors, including a clogged nozzle, a kinked hose, or a dirty filter. Try cleaning the system if you believe the tankless water heater is causing the problem. 

To clean the system, turn off the power to the heater. Then, disconnect the hoses and remove the filter. Next, use a garden hose to flush the system. Be sure to reconnect the hoses and filter before turning on the power.

Final Thoughts 

Your tankless water heater requires repairs if you are experiencing any of the issues in this article. If you are unsure, however, about whether your water heater needs repairs, it is always preferable to seek professional guidance.  

Climate Experts is a Canadian-owned and -operated company that provides affordable and high-quality tankless water heater repairs in Durham to ensure your appliance works efficiently and lasts longer. Contact us today for more information!

Some homeowners ignore household maintenance issues for as long as possible. They may believe that delaying addressing the problem will make it go away. However, home systems like the HVAC system often require routine maintenance to keep them running efficiently and reliably.

If you don’t take care of your furnace, it will eventually stop working properly. This means your house won’t be as comfortable in extreme temperatures. Additionally, your furnace could start having other issues that could be expensive to fix.

Here are some reasons why you shouldn’t ignore furnace repair and maintenance:

1. To Reduce the Risk of Carbon Monoxide Poisoning or a House Fire

A heat exchanger is used in gas furnaces to extract hazardous gases such as carbon monoxide from hot air. The heat exchanger is made of metal and contains a series of metal plates that expand and contract as the temperature of the heat exchanger varies. The heat exchanger in your furnace could develop cracks over time. If this happens, harmful gases like carbon monoxide could escape your home. You can’t smell or see carbon monoxide, so it would be hard to know if it’s present.

If the wires in your HVAC system are loose or the pilot light isn’t working correctly, it could cause a fire or explosion. Regular HVAC maintenance will ensure that your system’s wiring and gas lines are in good condition and haven’t deteriorated over time.

2. To Prevent More Costly HVAC Repairs in the Future

Many homeowners choose not to schedule routine maintenance for their HVAC systems to save money. However, doing this often causes more stress on the system due to minor issues that are not taken care of. Operating your HVAC system in extreme conditions will likely lead to more expensive repairs down the line.

3. To Avoid Frozen or Burst Pipes

If a furnace is neglected during winter, it may lose a component or break down entirely. In extreme cases, this can cause the water in a building’s pipes to freeze. Frozen pipes can cause a lot of damage to a home. They can cause sinks, showers, toilets, and other appliances to break and put the entire house at risk. Water expands as it freezes and when it freezes, it can cause the pipes to burst. This can cause water damage throughout the building.

4. To Maintain Good Air Quality Indoors

If your HVAC system is not properly maintained, the air quality inside your building can suffer. Dust, allergens, and pollutants can circulate through the system and end up in the air you breathe. While it’s not as dangerous as carbon monoxide, it can still harm your health. Ensure your HVAC system is serviced regularly to ensure the air in your home or office is clean and safe to breathe.

5. To Conserve Energy

An HVAC system that has not been regularly maintained will not work as efficiently as one that has. The system will have to work harder to maintain a comfortable indoor temperature and use more energy. This is inefficient and will cost you more money in the long run. Though repairs and maintenance may be costly, they’ll save you money down the line on your energy bill.

Conclusion

It is important to note that furnace repair and maintenance should not be ignored. Doing so can lead to several consequences, including decreased efficiency, increased chance of breakdown, and shortened lifespan. By ensuring that your furnace is regularly serviced and repaired, you can help avoid these issues and keep your home comfortable all winter long.

Climate Experts is a Canadian-owned and -operated company serving the Durham Region, GTA and the surrounding area. We provide home heating services, furnace repair, HVAC, and air conditioning repair and maintenance in Pickering, Ajax, Oshawa and Toronto. We are available to serve you 24/7 emergency service in a quick and timely manner. If you need furnace maintenance services in Pickering, we’ve got you covered! Get in touch with us today!

A furnace leak is a serious problem that can result in extensive damage to your home. Many different things can cause a furnace leak, and it is important to be aware of the most common culprits so that you can take steps to prevent them.

1. Cracked Heat Exchanger 

The heat exchanger is responsible for transferring heat from the furnace to the home. If it is cracked, it can cause the furnace to leak water or other fluids. It can also leak carbon monoxide, which is extremely dangerous.  

In some cases, a cracked heat exchanger can also lead to a fire. If you notice any cracks in your heat exchanger, it is important to have it repaired or replaced as soon as possible.

2. Clogged Condensate Line

The condensate drain line is responsible for carrying away water and other fluids that condenses on the heat exchanger. If it becomes clogged, it can cause the furnace to leak which can lead to water damage. It is important that you have it cleaned out as soon as possible.

3. Flue Pipe Problem

Another thing that can cause furnace leaks is a problem with the flue pipe. The flue pipe is responsible for carrying gases and other fumes away from the furnace, and if it becomes blocked, it can cause the furnace to leak. In some cases, a blocked flue pipe can also lead to a fire. If you notice that your flue pipe is blocked, schedule a cleaning immediately. 

4. Loose Connections

Another possible cause of furnace leaks is a loose connection. Furnaces have a lot of different connections, and if any of them become loose, it can cause a leak. 

This is usually an easy problem to fix, but it’s important to have a professional check it to make sure that there isn’t any other damage.

5. Venting System

The venting system is responsible for carrying gases and other fumes away from the furnace, and if it becomes blocked, it can cause the furnace to leak. In some cases, a blocked venting system can also lead to a fire. If you notice that your venting system is blocked, you should have it cleaned.

If you suspect that your furnace is leaking, it is important to have it inspected by a qualified technician as soon as possible.

6. Old Age

Over time, furnaces can develop cracks and other problems that can cause leaks. If your furnace is more than ten years old, it’s a good idea to have it inspected by a professional to ensure it’s still safe to use.

Conclusion

If you’ve been noticing water around your furnace, don’t ignore it. There are several potential causes of furnace leaks, some of which may cause serious damage to your property. 

If you’re unsure what’s causing the leak, it’s always a good idea to call a professional for help. They will be able to inspect your furnace and determine the leak’s source so it can be fixed.

Climate Experts is a Canadian-owned and operated company serving Durham Region and the surrounding area. We install, service and preserve all major brands of air conditioners. Contact us today if you are looking for a furnace repair around Ajax. 

As a responsible homeowner, you must regularly maintain the furnace in your home. After all, having no heat for the entire winter is a struggle in and of itself. Meanwhile, you will need air conditioning to save you and your family from heat waves. 

Read on to discover the eight telltale signs it’s time to repair your furnace.

Sign #1: The Odour

Furnaces should no longer create a strong odour once some time has passed. As such,  it’s recommended that you schedule furnace maintenance if you notice an odour that comes abruptly or persists for a lengthy period of time.

Strong exhaust odours may come from inefficient combustion. Aldehydes are responsible for the unpleasant stench created by inadequate combustion.

Sign #2: The Water Leaks

If you notice a pool of water near your heating system, you most likely have a water leak, which is a simple problem to resolve.

Condensation is the most likely cause of water seepage. A broken condensation line or a clogged condensation drain could be the source of the problem. A clogged drain or humidifier, for example, could also produce a leak.

Sign #3: The Gas Leaks

If you detect the odour of gas, contact an HVAC professional as soon as possible. Because gas ignites so quickly, even the smallest spark can utterly demolish your home. You should leave the house until the leak is repaired or a competent expert determines that the furnace is not leaking.

Sign #4: The Strain to Turn the Unit On

When it comes to maintenance, the needs of a furnace grow in direct proportion to its age. There is a chance that you will eventually have problems starting and running the machine.

If starting your furnace takes many attempts or if you’re obliged to do it several times per day, you should contact a skilled technician. Many of these problems could be attributed to dirty filters, internal AC coils, and secondary heat exchangers.  possible that a filthy flame sensor will cause the furnace to behave erratically.

Sign #5: The Separate Heat Sources

If you see shifting temperatures despite other parameters remaining constant, it’s likely that your furnace requires maintenance. If your furnace is in good functioning order, you should not have alternating episodes of cold and warm temperatures in your home.  always better to have an even heat distribution.

Sign #6: The Increasing Energy Costs

If you notice a rise in your monthly energy expenses, your furnace may be inefficient and in need of repair. Even while you should expect seasonal fluctuations in your energy costs, you should nonetheless be on the watch for sudden or persistent increases that cannot be justified. These could be indications that your furnace is malfunctioning.

Sign #7: The Detected Carbon Monoxide

If your home’s carbon monoxide alarm goes off, it means you’re in a perilous scenario that necessitates emergency evacuation and the attention of HVAC specialists.

Carbon monoxide is lethal. Heat exchangers with cracks could potentially allow gas into the home. Carbon monoxide can only be detected by its existence in the form of an alert because it lacks both odour and colour.

Sign #8: The Unpleasant Noise

A furnace’s condition can be determined by listening to its typical continuous buzzing sound. Strange noises emanating from the furnace, such as pounding, rattling, irregular humming, moaning, and rattles, could indicate a problem.

If the noises continue, you should contact a competent expert who can evaluate the issue and confirm that your heater is not malfunctioning.

Conclusion

Now that you know the telltale signs it’s time to repair your furnace, your job as a homeowner is to be attentive to them. After all, you never know when your furnace gives up on you. As such, if you call a furnace repair professional, they will be able to identify the problems and immediately provide the best solutions for your home.

Are you in need of furnace repair in Pickering? The Climate Experts team is here to help you with your furnace needs, even for emergencies! Simply give us a call today to learn more about our services.

Your air conditioner is one of the most essential appliances in your home, and you rely on it to keep you cool and comfortable all summer long. But what happens when your AC unit starts leaking water?

There are several reasons why your AC unit may leak water, some of which are more serious than others. In this article, we’ll look at three of the most common causes of AC unit water leakage and how you can fix them.

1. The AC Drain Is Disconnected

One of the most common causes of an AC unit not working is a disconnected AC drain. The AC drain is responsible for draining away any moisture that condenses on the evaporator coils. If this drain becomes disconnected, the moisture will build up and eventually cause the AC unit to shut down.

A few things can cause the AC drain to become disconnected. One is simply age and wear – over time, the connections can become loose and eventually come apart. Another common cause is debris – if anything is blocking the drain, it can prevent the moisture from draining away properly.

If you suspect that your AC unit’s drain is disconnected, the first thing you should do is check the connections. If they’re loose, you can try to tighten them. If they’re completely disconnected, you’ll need to reconnect them.

2. There Is Condensation Build Up

When your AC unit is running, it pulls in warm air from your home and cools it down. This process causes water to condense on the coils inside the unit. This water is then supposed to be drained away, but if the drain is blocked or not working correctly, the water can build up and cause problems.

If you notice that your AC unit is building up condensation, you should first check the drain to see if it is clear. If the drain is blocked, you can try clearing it yourself, or you may need to call a professional to do it for you. If the drain is clear, but the condensation is still building up, it may be a sign that your AC unit is not sized correctly for your home. If this is the case, you will need to call a professional to have your unit replaced or repaired.

3. The Condensation Pump and Float Switch Is Broken

If you have a condensation pump and float switch in your home, you may be wondering what could cause them to break. The most common cause of this is quite simple: the switch is broken. This can happen for a number of reasons, but usually, it’s because the switch is old or has been damaged.

The good news is that fixing a broken condensation pump and float switch is relatively easy. All you need to do is replace the switch. You can find replacement switches at most hardware stores or online.

Once you have the new switch, remove the old one and install the new one in its place. Make sure that the new switch is the same type and size as the old one so that it will fit properly. Once the new piece is in place, your condensation pump and float switch should be good as new!

Final Thoughts

There are a few common causes of AC unit water leakage, and thankfully, most of them are relatively easy to fix. If your AC unit leaks water, check the tips mentioned above. With some troubleshooting, you should be able to fix the problem and get your AC unit up and running again in no time.

You can call for professionals if you feel you can’t handle the repairs. For air conditioning repair in Pickering, give us a call at Climate Experts. We offer our expert services in Pickering and other spots in the Durham region, even for 24/7 emergency assistance. Get in touch with us today for a quote!

Air conditioners are excellent additions to a home, keeping the air cool, warm, and free from potential allergens. However, similar to other appliances and devices, they experience wear and tear over time. Therefore, preventive maintenance and necessary repairs should help extend your air conditioner’s lifespan. But which best practices should homeowners do? Here are some ideas.

1. Conduct Annual Service Maintenance

The first step to prolonging your air conditioner’s lifespan is to ensure it is regularly serviced. It means having a qualified technician inspect and clean critical components like the blower, coils, and condenser. The technician will also check for leaks and other potential problems.

It is best to have your air conditioner serviced in the spring if you live in a hot climate. It will ensure it is in good condition before the peak of the summer. In the fall, it is essential to have your furnace and other HVAC components serviced to ensure they are ready for the cold winter months.

2. Change Filters as Scheduled

While you should always have your air conditioner serviced by a professional, there is a maintenance task you can do on your own. The air filter should be changed every 30-60 days, making it safer for the people at home.

If you have pets or are allergic to pollen, dust, and other airborne particles, you should change the filter every month. A dirty filter will restrict airflow and cause your unit to work harder, increasing electricity consumption and reducing efficiency.

3. Clean Accessible Areas

You should frequently clean the areas around your system to ensure it’s not obstructed. Using a central air conditioner, you should clean the ductwork, vents, and registers. Cleaning the accessible areas should help the system to function better as expected.

While you can’t access the inside of your unit, there are areas you can clean yourself. The most critical areas are the coils, fins, and fan. Keep the site around the unit clean and free of debris, dust, and cobwebs.

4. Set the Perfect Temperature

Depending on where you live, you can set your AC to cool to a comfortable temperature. The temperature you select will help the system to function better. If you set the temperature too low, it will require more energy to cool your home.

Setting the temperature too low will put more strain on your system and cause your electricity bill to go up. Meanwhile, setting it too low may hinder it from performing at its full potential. The ideal temperature is around 78 degrees Fahrenheit (25.56 degrees Celsius).

5. Keep It Smelling Fresh

If your home smells stuffy, it’s likely because your AC system is dirty. A dirty AC system can be a breeding ground for mould and mildew. It can cause allergies and other respiratory problems. To keep your home smelling fresh, you can clean your AC system.

You can clean your AC system by removing the filter and washing it with soap and water. You can also use a vacuum cleaner to clean the vents and ducts. If you have a window AC unit, you can clean it by removing the front panel and wiping down the coils with a damp cloth.

Conclusion

If your AC system is not working correctly, it can be frustrating and uncomfortable. Luckily, there are some things you can do to troubleshoot and fix your AC system. A clean and well-maintained AC system is essential for keeping your home cool and comfortable during summer. By following these tips, you can ensure that your AC system runs efficiently and effectively.

Climate Experts is a Canadian-owned and operated company serving the Durham region. We offer HVAC services like HVAC repairs, furnace installation, and boiler maintenance. As the leading cooling and heating company in Pickering, we take pride in providing excellent service. Book an appointment on our website today for more information.