If your furnace stops working, it’s important to troubleshoot the issue as soon as possible. After all, you rely on your furnace to keep your home warm during the colder months. There are several potential furnace problems that could be to blame, but fortunately, most of them are relatively easy to fix.

In this comprehensive guide, we’ll show you seven expert solutions to common furnace problems. We’ll cover everything from troubleshooting a pilot light that won’t stay lit to fixing a furnace that’s blowing cold air. So whether you’re a first-time furnace owner or a seasoned veteran, this guide will help you get to the bottom of your furnace problems and get your heat back on as quickly as possible. Let’s get started!

Here are seven expert solutions to furnace problems:

1. Check the Pilot Light

One of the most common furnace problems is a pilot light that has gone out. If your furnace won’t turn on, check to see if the pilot light is lit. If it’s not, relight it according to the instructions in your furnace’s owner’s manual.

2. Clean or Replace the Furnace Filter

A dirty furnace filter can restrict air flow, causing your furnace to work harder than it needs to. As a result, your furnace may not heat your home as efficiently as it could. To prevent this problem, clean or replace your furnace filter at least once a month.

3. Check the Thermostat

If your furnace won’t turn on, it could be because the thermostat is set to the “off” position. Make sure the thermostat is set to “heat” and that the temperature is set above the current room temperature.

4. Inspect the Blower Belt

If the furnace is running, but the air isn’t circulating, the problem could be a broken blower belt. Inspect the belt to see if it’s broken or frayed. If it is, you’ll need to replace it.

5. Clean the Burners

If the furnace is running, but the air isn’t getting hot, the problem could be dirty burners. Over time, dirt and dust can build up on the burners, causing them to work less efficiently. To clean the burners, turn off the furnace and remove the access panel. Then, use a brush to clean the burners.

6. Check for Leaks

If the furnace is running, but the air isn’t getting hot, the problem could also be a gas leak. To check for a gas leak, turn off the furnace and smell for gas near the furnace. If you smell gas, call your gas company immediately.

7. Call a Professional

If you’ve checked all of the above and the furnace is still not working, it’s time to call a professional to take a look at it. An HVAC contractor will be able to troubleshoot the problem and let you know what needs to be done to fix it.

Conclusion

It is important to be aware of the most common furnace problems in order to keep your home warm and comfortable during the colder months. By following the expert solutions provided in this guide, you can be sure that your furnace will be running smoothly and efficiently all winter long.

If you’re looking for HVAC repair in Pickering, Oshawa, Ajax, and Toronto or whether you have other home heating systems concerns, we can help. Climate Experts is a Canadian-owned and -operated company serving Durham Region, GTA, and the surrounding area. We install, service, and maintain all major brands of furnaces and air conditioners, available to help you with 24/7 emergency service quickly and promptly. Call us today at 1-855-241-7171 for a free estimate. 

The majority of conventional water heating techniques are thought to be less efficient than tankless water heaters. They can deliver hot water on demand without wasting energy heating water that isn’t being used, which is largely why this is possible. 

Even when you aren’t using a tank, it continues to heat up the entire tank by storing warm water. Because the heater must reheat the entire tank when you actually need hot water, this is energy wasteful.

Continue reading to know how a tankless water heater can benefit you.

Performance

Some people might believe that a tankless water heater will function less efficiently than other models of heaters, such as those that employ resistor coils or convection. 

However, tankless water heaters offer an average heating performance strikingly similar to a conventional gas water heater. 

The fact that these appliances deliver hot water when you need it without wasting energy is their true advantage. A conventional gas tank unit will always experience some loss because the heat is always being reheated and not consumed.

Sturdiness

With an electric unit’s typical lifespan of twenty to twenty-five years, your investment should last you for a long time, keeping your energy costs low and preventing you from having to replace it until you are competent enough to handle the installation on your own. 

When these water heaters experience problems in the future, the majority of homeowners can quickly learn how to maintain and operate them.

Price

Depending on the model placed in your home, one of these devices typically costs between $400 and $1,000. This can be expensive, but if done properly, it will undoubtedly pay you in the long run as electricity prices rise each year. 

If your residence has affordable utilities, buying an electric or propane tankless unit won’t save you much money because these units won’t perform much better than any regular gas storage heating system. 

If you reside in a high-cost area, you will begin to experience savings after utilizing the service for a few months.

No-Fuss Installation

You don’t need hot water plumbing or gas lines to install one of these in your house. You can place it on a wall close to an electrical outlet by anyone who understands how electrical and plumbing circuits work. Ensure that the device is correctly grounded.

Little Upkeep Required

It takes ten years of service before maintenance is required. There is no need to inspect the anode rod, as you would with a tank heater. All should be okay for many years if you only make sure your filter is always clean and there isn’t any sediment buildup in your incoming water supply.

Conclusion

It is obvious that tankless water heaters are an excellent solution to supply hot water for a range of needs without the requirement for storage. 

It doesn’t require maintenance like other HVAC systems; therefore, it may be deployed in small places. The tankless technology heats water only as it is required, making it less expensive to run than conventional heaters.

If you need help installing tankless water heaters in Pickering, don’t hesitate to call Climate Experts! We’re a Canadian-owned and -operated company installing, servicing, and maintaining all major brands of furnaces and air conditioners. Call our 24/7 service anytime!

When it comes to your furnace, you may be wondering if it’s time for an upgrade. After all, your furnace is one of the most important components of your home, and you want to ensure it’s running efficiently and effectively. Here are reasons you should upgrade your furnace:

Consider Significant Changes to Your Home

If you’ve made significant changes to your home, such as adding or finishing your basement, your furnace may not be able to keep up with the increased demand. Upgrading to a larger furnace will help to ensure that your home is comfortable year-round.

You Want More Energy Efficiency

If you’re looking to save money on your energy bill, then upgrading your furnace is a great option. Today’s furnaces are significantly more energy efficient than older models, allowing you to save money on your energy bill.

You Have an Older Furnace

If your furnace is more than 15 years old, you should consider upgrading it. Older furnaces are less energy efficient and may not be able to keep up with your home’s heating needs.

You Have Frequent Repairs

If your furnace needs frequent repairs, then it’s time to replace it. Frequent repairs are a sign that your furnace is nearing the end of its life and may need to be replaced.

You Want Superior Safety Features

You should upgrade to a newer model if you want a furnace with superior safety features. Many newer furnaces come with safety features that help to prevent carbon monoxide poisoning and other hazards.

You’re Ready for a New Look

If you’re ready for a new look, then you should upgrade to a newer model. Newer furnaces come in various styles, so you can find one that matches your home’s décor.

You Want to Improve Your Home’s Resale Value

If you’re planning on selling your home soon, you should upgrade to a newer model. Newer furnaces come with a higher resale value, so they can help you to get more money for your home.

The Important Things to Consider When Shopping for a Furnace

Now that you’re convinced you need to upgrade to a new furnace, it’s time to start shopping around. Here are a few things you’ll want to keep in mind as you shop.

• Furnace Efficiency

The furnace’s efficiency is one of the most important things to consider. You want to make sure that you get a furnace that is as efficient as possible. A more efficient furnace will keep your home warmer while using less energy, which will help you save money on your energy bills.

• Furnace Size

You also need to ensure that you get a furnace that is the right size for your home. If you get a furnace that is too small, it won’t be able to heat your home properly. If you get a furnace that is too big, it will use more energy than necessary, which will also cause your energy bills to go up.

• Furnace Type

You can choose from two main types of furnaces: gas and electric. Gas furnaces are usually more efficient, but they can be more expensive. Electric furnaces are less expensive but aren’t as efficient as gas ones. You’ll need to decide which type of furnace is best for your home based on your budget and your needs.

• Furnace Installation

You also need to make sure that you get a furnace that is easy to install. Some furnaces can be very difficult to install, which can cause you to spend a lot of money on installation fees. You should try to find a furnace that comes with easy-to-follow instructions so that you can install it yourself. If you’re not comfortable installing the furnace yourself, you can always hire a professional to do it for you.

To Sum Up

In conclusion, although upgrading your furnace may seem like a big expense, there are many benefits to consider. Not only will you likely save money in the long run with a more efficient model, but you’ll also enjoy increased comfort and peace of mind. If you’re on the fence about whether or not to replace your furnace, these five reasons should help you make a decision.

Do you need furnace installation in Pickering? Climate Experts is Canadian-owned and operated that services the Durham region, GTA, and the surrounding areas. Get in touch.

Your furnace and duct system is the heart and lungs of your entire home. And, as you know, if your heart and lungs are facing a problem, so will the rest of your body! The same can be said about homes, where if the furnace and duct system runs into problems, the rest of the house will run into serious consequences.

That being said, many of these problems can actually be avoided with proper installation, but that’s where many furnaces fall short. Many people assume that installing a furnace is just as easy as simply picking a spot and putting it there. While that’s the gist of it, there’s a whole lot more to it than just finding a nice place to put it that you think will work and plopping it down.

Today, we want to share with you the common mistakes you must avoid during furnace installation to avoid a disaster:

Mistake 1. Not Hiring a Professional

One of the most common mistakes that homeowners make is not hiring a professional to install their furnaces. While it may be tempting to try to save some money by doing it yourself, this is usually a mistake. Furnace installation is not a do-it-yourself project, and it’s important to have a professional handle the job to ensure it’s done correctly.

Mistake 2. Not Getting a Properly Sized Furnace

Another common mistake is not getting a furnace that is properly sized for your home. This is important because if your furnace is too small, it won’t be able to heat your home properly. On the other hand, if your furnace is too large, it will cycle on and off too frequently and will be less efficient. A professional installer will be able to help you select a furnace that is properly sized for your home.

Mistake 3. Not Checking for Gas Leaks

If you have a natural gas furnace, it’s important to have a professional check for gas leaks before the installation is complete. Gas leaks can be extremely dangerous, and even a small leak can lead to a big problem. A professional installer will know how to check for gas leaks and will make sure that your furnace is safe to operate.

Mistake 4. Not Installing the Furnace Properly

Another common mistake is not installing the furnace properly. This can lead to a number of problems, including poor heating performance, increased energy costs, and even safety hazards. A professional installer will know how to install your furnace correctly to avoid these problems.

Mistake 5. Not Maintaining the Furnace

Once your furnace is installed, it’s important to maintain it properly. This includes regular cleaning and inspections, as well as changing the filter on a regular basis. A professional installer can help you learn how to properly maintain your furnace to keep it running efficiently and safely.

Conclusion

So, are you planning to install a new furnace? If so, avoid the mistakes we’ve mentioned above. It’ll go a long way in ensuring your furnace is not only installed properly but also kept in good shape to keep your home a nice and warm place to live in!

Climate Experts is a Canadian-owned company that offers installation, servicing, and maintenance solutions for major furnace and air conditioner brands. If you are looking for furnace installation in Pickering, reach out to us today!

It is essential to pay attention to the quality of the air that you and your loved ones inhale daily. The portion of your HVAC system known as the air ducts is responsible for distributing air throughout your home. It has the potential to accumulate allergens such as dust, pollen, and other particles over time. This results in poor indoor air quality, which can cause breathing difficulties, headaches, and other health problems.

Because the typical person spends most of their time indoors, it is critical to ensure that the air they are inhaling is free of contaminants. Maintaining clean air ducts is one of the ways you can accomplish this goal. Read on to learn the essential things about air duct cleaning.

How to Properly Clean the Air Ducts?

Most people don’t think about their air ducts until they have a problem with them. But the truth is, your air ducts play a crucial role in the quality of the air you breathe every day. That’s why keeping them clean and free of debris is essential.

The first step is to vacuum the vents that lead into the air ducts. It will remove any dust or debris that’s accumulated on the vents. The next step is actually to clean the air ducts themselves. You can do this with a brush and a vacuum. First, use the brush to dislodge any dirt or debris clinging to the sides of the ducts. Then, use the vacuum to suck up the dirt and debris.

Once you’ve cleaned the ducts, you should seal any cracks or holes in the ductwork. It will help to prevent dirt and debris from getting into the vents in the future. Finally, replace the air filters in your heating and cooling system. It will help to ensure that the air you’re breathing is as clean as possible.

How Often Should You Have Your Air Ducts Cleaned?

If you have never had your air ducts cleaned, you may be wondering how often you should do so. The answer depends on a few factors, including the type of air ducts you have, the level of contamination in your ducts, and your personal preferences.

Mould growth on the ducts or other HVAC system components is one telltale sign that you may need to clean your air ducts. Dust and dirt from the vents are further indicators that you may need to inspect your ventilation system. If you notice any of these signs, it’s time to have your air ducts cleaned. A professional duct cleaning company will use specialised equipment to clean your ducts and remove debris, dust, or other contaminants.

What Are the Benefits of Regular Air Duct Cleaning?

Having your air ducts cleaned regularly will provide you with many benefits. The improvement in air quality is probably the most readily apparent advantage. Enhanced energy efficiency is another significant advantage of cleaning one’s air ducts. Your heating, ventilation, and air conditioning system must work harder to push air through your ducts when they are blocked with dirt and debris.

Not only does this result in a waste of energy, but it also has the potential to hasten the system’s deterioration. You can help your heating, ventilation, and air conditioning system function more efficiently and save on your monthly energy costs by maintaining clean ducts.

Conclusion

Regular air duct cleaning has many benefits, including improved indoor air quality, reduced dust and allergens in the home, improved HVAC efficiency, and extended life of your HVAC system. If you are concerned about the air quality in your home, it is a good idea to have your air ducts cleaned regularly. Also, hiring a professional maintenance service is recommended to ensure your HVAC system’s continued operation.

Are you searching for ductwork installation, repair and air conditioner repair services? Check out Climate Experts! We can install, modify, and repair ductwork in newly constructed, pre-existing, and custom-built homes. The high-quality repair and installation services we offer for ductwork can help you solve various problems that may be caused by the ducting in your homes. Contact us for more information about our ductwork installation and repair services today!

Although there isn’t a set timetable for arranging a furnace repair appointment, we advise that every home book one at least once a year. There are certain obvious indications that you should get your furnace inspected before winter in the fall. 

Get your furnaces inspected before the winter season officially begins for the simplest method to guarantee that it will keep your family warm throughout the season.

1. There Are Odd Noises Coming From Your Furnace

The Heating, Refrigeration, and Air Conditioning Institute of Canada advises that strange noises should be a cue to schedule a professional inspection. If you hear pops, squeaks, whining, or rattling coming from your furnace, there could be a problem. 

There are straightforward fixes; for instance, blocked air filters frequently result in loud slamming noises. However, certain sounds might indicate more severe issues. If a filthy burner isn’t cleaned, it might ruin your furnace and make unusual noises.

2. Your Furnace Is Older Than Eight Years

Regular maintenance is necessary for all furnaces, but it’s crucial for those over 8 years old. A furnace can last between 8 and 15 years. However, older furnaces are more likely to require maintenance or new parts. 

Depending on the component, your furnace’s ability to operate effectively declines as it loses functionality. 

To assist you in avoiding failure when you need your furnace the most, our professionals will examine it and make sure that any worn parts are replaced.

Depending on the type and manufacture, your furnace may need to be replaced at this stage. You should, at the absolute least, get your older unit inspected by a professional if you want to be sure that it will function throughout the winter.

Any anomalies that might later lead to more significant issues, such as full furnace breakdowns, will be seen by an expert’s trained eye.

3. The Pilot Light In Your Furnace Has An Unusual Hue

The pilot light on your furnace may have a strange colour if more significant problems exist. The pilot light should be blue, but any hue other than blue might point to a more significant issue. 

You should be worried if your pilot light turns yellow since this might mean that the combustion process in your furnace isn’t operating properly. Inefficient combustion reduces the efficiency of your furnace and raises the danger of carbon monoxide poisoning.

The simplest action to avoid carbon monoxide poisoning from your furnace is to get it checked often. One of our specialists will inspect your furnace during a furnace check-up to determine why your pilot light is discoloured. 

Usually, a clogged intake valve causes yellow pilot lights, and all that is needed to fix them is a thorough cleaning. Whatever the problem, we’ll ensure your furnace operates as safely and effectively as possible.

4. Over A Year Has Passed Since The Inspection of Your Furnace

Schedule an appointment before winter if it has been more than a year since your furnace was inspected. You should have furnace maintenance at least once yearly to ensure that it runs correctly and lasts as long as possible. 

The Canadian government advises scheduling an appointment for your furnace’s cleaning and maintenance once a year to ensure it runs as effectively as possible.

Since our experts are trained to spot the warning indications of more severe furnace issues, even the most basic sounds or smells might indicate something more catastrophic.

 One of our specialists will inspect your furnace during your appointment to look for any problems or repairs that might be necessary to keep it running through winter.

5. Your Furnace Either Doesn’t Function At All Or Not Adequately

Of course, you should speak with one of our home comfort experts if your furnace isn’t functioning correctly. 

When turning on their furnace for the first time in the winter, many individuals have problems, ranging from their furnace blowing cold air to their furnace not lighting at all. If so, your furnace may be spewing chilly air, which means the blower fan requires maintenance or replacement. 

Another frequent issue that may be easily fixed if a wire is removed or the thermostat is damaged is difficulty starting the furnace.

Conclusion

Regardless of the problem, having a professional inspect your furnace if it isn’t operating correctly is critical. We’ll examine the dependability and efficiency of your whole furnace system. To prepare for winter, schedule a visit to get your furnace inspected or for furnace installation. 

Climate Experts is a Canadian-owned and -operated company that provides services to the Durham region, the GTA, and the surrounding regions. We install, repair, and maintain furnaces and air conditioners from all major manufacturers. Since we are available 24/7, we can handle your emergency requests swiftly and effectively. Contact us for furnace maintenance. 

It is that time of year again. Colder weather means that the holiday season is upon us. For many of us, this is a time of year when we start to think about our loved ones and how we can make their holiday season special.

Before you start your holiday shopping, take a moment to inspect your furnace. It might need some TLC before the cold winter months set in. 

With regular use, your furnace will eventually need maintenance to keep running correctly. Regular furnace maintenance is a brilliant way to keep your furnace running smoothly and efficiently. Schedule a tune-up with a qualified heating contractor before the weather gets too cold.

If your boiler needs more than a tune-up, it might be time to replace it. A new furnace can provide you with more efficient heating and can also help improve indoor air quality. When shopping for a new furnace, compare energy efficiency ratings to find the most efficient model.

Most of the issues with furnaces come from inappropriate installation. If a boiler is not installed correctly, it can lead to several problems, including poor performance, increased energy costs, and safety hazards.

Low Airflow

It could be due to low airflow if you have noticed your furnace kicking on and off more frequently than average. While there are numerous possible causes of this problem, low airflow is among the most common. A few things can cause low airflow in your furnaces, such as a clogged air filter or a blockage in the ductwork. However, the typical cause is a problem with the blower motor.

If the blower motor is not working correctly, it cannot move enough air through the furnace. It causes the furnace to cycle more frequently because it cannot heat the home as quickly. If you suspect that low airflow is the cause of your furnace’s short cycling, the best thing to do is call a seasoned furnace maintenance contractor. They can diagnose the problem and make the necessary repairs.

Faulty Thermostat

If the boiler is short cycling, it could be due to breakage or a faulty thermostat. Let us take a closer look at each of these possibilities. A breakage in your furnace can cause a short cycle because the boiler cannot generate enough heat to warm your home. As a result, it will turn on and off more frequently to reach the desired temperature.

A faulty thermostat might cause the boiler to short cycle because the thermostat is not accurately reading the temperature in your home. As a result, it may turn the furnace on and off more frequently than necessary. If your furnace is short cycling, it is essential to have it inspected by a professional. They can determine the cause of the problem and make the necessary furnace repairs.

Closed Air Vents

It is essential to keep your air vents open, even in the room you do not use because of the heat exchanger. The heat exchanger is a device used to transfer heat from one medium to another. It is essential for the proper functioning of your HVAC system. If the heat exchanger does not get enough air, it will heat up and cause short cycling. 

Conclusion

There are a few common furnace problems that homeowners should be aware of. These include a dirty or clogged filter, a faulty thermostat, or a pilot light that has gone out. By troubleshooting these issues, you can often fix your furnace yourself. However, if the problem persists, it is always best to call a professional.

Before winter sets in, you should ask Climate Experts to inspect your furnace. We offer top-notch furnace maintenance to Pickering residents, ensuring that you will have a warm and toasty winter. So, book an appointment now!

 

If your furnace is blowing cold air in your home, this is a sign of an issue with the flame detector, gas supply, air filter, pilot light, or condensate lines. Many of these issues you can quickly solve on your own, especially since winters in Canada can be freezing cold and may drop as low as -30 to -40 degrees celsius. 

During this cold weather, you must know what to do when your furnace is not working as it should. So, here are five common causes your furnace is blowing cold air and tips on how it can get fixed:

1. Worn-Out Flame Sensors or Flame Limiter

The flame limiter system will shut off the furnace when the flame sensor is worn out. If this happens, it can lead to the furnace becoming blocked in the on position, which can be bad news if you’re cold and rely on your furnace for heating. For example, your furnace could run full-time and have an internal motor burn out due to excess heat. 

How to Fix It: You may be able to get your furnace fixed quickly by replacing the sensors. However, you should contact a professional to get a more permanent fix.

2. Faulty Gas Valve

The gas valve will shut off gas flow to the furnace if there is no flame. If the gas valves are faulty or too old, this will cause your furnace to blow cold air.

How to Fix It: Turn the gas off at the furnace to ensure you do not get any dangerous gas leaks. You may also need to call a professional to turn the gas back on or ensure the gas lines are all connected properly.

3. Blocked Air Filter

A blocked air filter can lead to your furnace not working as well. A furnace needs an adequate amount of airflow to keep the fire burning. If it does not have the right airflow, it can lead to the furnace blowing cold air.

How to Fix It: Some people find it easier to take the air filter off and clean it themselves. If you do this, make sure to replace it back in the exact spot where it was before you removed it.

4. Old or Faulty Furnace

Furnaces are a major investment, so if your furnace is old, you will likely need to replace it. Call an expert repairman right away if you notice any of the following:

• The furnace is too noisy.
• The furnace is not blowing enough air out of the vents.
• Condensation is leaking out of the furnace.

How to Fix It: You can hire a professional to come into your home to inspect your furnace and work on it if needed.

5. Blocked Gas Lines

If your furnace is not working, the problem could be blocked gas lines. This will keep the furnace from getting the gas it needs to keep running.

How to Fix It: If you see any blockages, you will need to contact a professional to have them removed. You may also need to call in a professional to have the entire gas line checked.

6. Defective Thermostat

If your thermostat is defective, it can lead to your furnace not pumping enough air. The furnace will then try to get the air going by blowing frigid air out of the vents, but since the thermostat is not working, it will never turn on.

How to Fix It: You can get a new thermostat from your local hardware store. You may also need to contact a professional to come and fix the thermostat if you cannot do it on your own.

Conclusion

Furnace troubles are the last thing you need in the winter months. If your furnace is not blowing out hot air, it will likely be one of the most unpleasant home repairs you can have to deal with. More often than not, it will be better to call for professional help because they can identify problems immediately and get your furnace running fast, saving you the trouble and extra cost of ineffective DIY efforts.

For furnace repair in Pickering, give us a call at Climate Experts. We install, repair, and maintain all of the major brands of air conditioners and furnaces, serving the Durham region, GTA, and neighbouring areas. Call us to get 24/7 emergency support from our team of experts.

In any home, proper ventilation matters because it ensures a comfortable living environment. During the cold winter months, the furnace often overworks, causing the air to become dry and stuffy. For this reason, it’s a homeowner’s responsibility to take care of their furnace, and the easiest way to spot a problem is if it makes odd noises.

A furnace is supposed to produce a low humming side as it works. Many issues can cause a furnace to malfunction, such as dirty or blocked filters, loose or broken components, and faulty wiring. However, sounds tell a different story because they’re too loud, indicating a severe problem. Few people know what these could mean, so we’ll discuss the details in this article.

What Strange Sounds Can a Furnace Make?

If a furnace doesn’t produce a low humming sound, it can make any of the following:

#1 – Loud Banging

If you hear a loud banging sound coming from your furnace, it’s likely due to loose or damaged parts. This is because the gas ignition is designed to create a loud noise when it ignites, and if there are any loose parts, they can cause the noise to be amplified. In some cases, the banging sound can also be caused by a build-up of soot or debris in the furnace, so it should be cleaned regularly.

#2 – Clicking

When a furnace clicks, the blower is usually affected. This is because the clicking sound is generally caused by the blower motor trying to turn on but unable to do so. Sometimes, it may also be caused by a loose wire or a faulty switch.

#3 – High-Pitched Squealing

If you hear a high-pitched squealing noise from your furnace, it’s likely due to a loose or damaged belt. The belts in furnaces can become worn down over time, which can cause them to squeal when trying to turn the blower. In some cases, you may need to replace the belt entirely.

#4 – Rumbling

If you hear a rumbling noise from your furnace, it’s likely due to a burner problem. The burners are what heat the air in your furnace, and if they’re not working correctly, they can cause a rumbling sound.

#5 – Popping

If you hear a popping noise coming from your furnace, it’s likely due to a build-up of soot or debris in the furnace. The soot or debris can ignite when this happens, causing a popping sound. In some cases, the popping may also be caused by a loose or damaged part.

#6 – High-Pitched Whistling

A high-pitched whistling from within the furnace is typically caused by warped ductwork. The furnace’s ductwork is responsible for carrying the hot air from the furnace to the different rooms in your home. If the ductwork is warped, it can cause the hot air to leak out, which will create a whistling sound.

#7 – Rattling

A rattling sound from your furnace is usually due to a loose part. The rattling can also be caused by something caught in the blower fan, such as a solid object.

Hiring a Furnace Repair Service

If you hear odd sounds from your furnace, you should hire a professional. To help you find the right service, here are some considerations:

Experience

You must consider the company’s experience when hiring a furnace repair service. A company with a few years of experience can still provide quality services, but hiring a company with a long experience is recommended. You can try looking for referrals from people you know or look at online reviews.

License and Permits

A furnace repair service must always have a license and permits required to perform the repair. By checking if the company has the required license and permits, you can be sure that you are dealing with a legitimate company that can perform the repair.

Price

Different furnace repair services charge different prices, so you should compare the prices of several companies before hiring one. You can ask each company for a quote and then assess each to fight the right fit for your budget.

Conclusion

A furnace provides warmth during the cold season, so you must ensure that it’s functioning correctly. If you have noticed that your furnace is not working as well as it used to, you should hire a furnace repair service. When you do, your home will be better because everyone can live comfortably.

Climate Experts provides top-quality services for furnace maintenance in Pickering. Our professional heating and cooling technicians will ensure your home is adequately ventilated, all for fair prices. Simply go to our website to request a quote!

When it comes to furnaces, one of the most important things to consider is the amount of space that is between the furnace and the walls. This space is important for a variety of reasons, and it is something that you will need to take into account when you are planning your furnace installation.

Why Is Space Between Walls and Furnaces So Important?

So, what’s the space between the furnace and walls for? What reason could there be? Well, one of the reasons this space is so important is because it helps to ensure that the furnace will be able to circulate air properly. If the furnace is too close to the walls, then the air that it is trying to circulate will be impeded. This can lead to a number of problems, including reduced efficiency and increased wear and tear on the furnace.

Another reason this space is so important is that it helps to protect the furnace from the elements. If the furnace is too close to the walls, then it can be exposed to the elements, which can damage it. By keeping the furnace away from the walls, you can help to extend its lifespan.

Another good reason that space is required is for technicians to better access the furnace. This can be important if you are replacing or repairing the furnace, as the extra space allows them to far more easily carry out their job.

Ultimately, the amount of space that you have between the furnace and the walls is something that you will need to take into account when you are planning your furnace installation. This space is important for a variety of reasons, and it is something that you will need to keep in mind in order to ensure that your furnace is installed properly.

How Much Space Should There Be?

In Canada, furnace installations must comply with the National Fire Code. The code requires a minimum clearance of 600 mm (2 feet) between the furnace and any combustible material.

In addition, the furnace must be installed in accordance with the manufacturer’s instructions. The manufacturer’s instructions will take precedence over the National Fire Code in terms of clearance requirements.

It is important to note that the National Fire Code is a minimum requirement. Some municipalities may have more stringent requirements, while others may be a little more laid back. For example, the City of Toronto requires a minimum clearance of 1 m (3.3 feet) between the furnace and any combustible material.

When in doubt, it is always best to consult with a professional to ensure that your furnace is installed properly and in compliance with all applicable regulations. If you fail to meet these requirements, you may run into consequences.

Conclusion

Simply put, make sure to have enough space between your furnace walls and the furnace itself. If you still aren’t sure how much space you should leave, always work with a professional to come and help you out. They know local regulations and will help you design a furnace room that meets requirements. This keeps you away from unnecessary danger and consequences that can all put your finances at risk!

Climate Experts is a Canadian company that installs, services, and maintains a variety of furnace and air conditioner brands. If you are looking for furnace installation in Pickering, get in touch with us!