If you’re wondering whether a heat pump or furnace is right for your home, there are a few things to consider. Heat pumps and furnaces have pros and cons, so it’s important to decide which is right for your specific needs.

How Does a Heat Pump Work?

A heat pump is a device that uses a small amount of energy to move heat from one place to another. Heat pumps are used to heat or cool homes and businesses and can also be used to generate hot water.

A heat pump consists of a compressor, a condenser, an expansion valve, and an evaporator. The compressor pumps a refrigerant through the system. The refrigerant absorbs heat as it evaporates and releases heat as it condenses. The expansion valve regulates refrigerant flow, and the evaporator helps transfer heat.

How Does a Furnace Work?

A furnace is a heating system commonly used in homes and businesses. Furnaces work by heating air and circulating it through the building. This process is typically accomplished by using a gas, oil, or electric heating element. In most cases, the furnace will also include a blower that helps to circulate the heated air. 

Furnaces are typically used in areas where the temperature needs to be maintained at a certain level, such as in a home or office. In order to keep the air in a building at a comfortable temperature, the furnace must generate enough heat to offset the heat lost through the walls, windows, and doors. 

Is a Heat Pump or a Furnace Better?

When it comes to your home’s heating and cooling, you want what’s best for your comfort and budget. So, is a heat pump or a furnace better?

There are many factors to consider when deciding whether to install a heat pump or a furnace. The most important factor is the climate you live in. A heat pump may be the better option if you live in an area with cool winters and hot summers. Heat pumps are more efficient than furnaces in both cooling and heating modes, saving you money on your energy bills.

A furnace may be the better option if you live in an area with very cold winters. Furnaces are more efficient than heat pumps in heating mode, so they can keep your home warm even when the temperature outside is very low.

Another factor to consider is the size of your home. If you have a large home, a heat pump may not be able to keep it warm enough in winter or cool enough in summer. In this case, a furnace would be a better option.

Finally, you should consider your budget. Heat pumps are usually more expensive to install than furnaces, but they can save you money on your energy bills in the long run. If you are on a tight budget, a furnace may be your best option.

Conclusion

Ultimately, there is no right or wrong answer when deciding between a heat pump or a furnace. It’s a decision that will come down to your specific needs and preferences. Consider all the factors involved before deciding to ensure you choose the option that’s best for you.

If you are looking for HVAC installation in Pickering, then you can hire us at Climate Experts. We provide high-quality services at an affordable price. Get in touch with us to learn more about our offerings.

You can concentrate on serious issues like system failures or component failures when it comes to boiler maintenance. You must also watch out for boiler corrosion, a less evident but highly dangerous issue that can quickly worsen into your boiler’s catastrophic collapse.

Any iron in the boiler system that is in contact with water and oxygen will corrode. Due to the chemical reaction brought on by this mixture, the metal in the boiler tubes and associated pressure parts eventually corrodes and disintegrates, resulting in rust development.

What Causes Boiler Corrosion?

Pitting corrosion is a specific type of corrosion that can be very harmful. The beginning of a pit or patch of corrosion is a local anodic or cathodic point. 

This corrosion might be accelerated by oxygen present in the boiler’s water feed. When pitting is noticed, it’s crucial to make sure that auxiliary equipment like deaerators, feedwater tanks, and chemical pumps are in good working order. 

You should also ensure that no leaks have formed that could let freshwater or process impurities into the system.

If inadequate water circulation hinders the washing of caustic components from the boiler surfaces, crevice corrosion may develop close to fissures. This is more typical in boilers with big water tubes.

On the metal near a joint, another sort of boiler corrosion may manifest itself. This corrosion, known as galvanic corrosion, develops when metals with different electrochemical compositions come into electrical contact with one another in an electrolytic environment. 

This kind of corrosion is more frequently observed in hydronic systems where the boiler heat exchanger and pipework are made of different metals. This kind of degradation can be avoided by using a dielectric joint or another form of safeguard.

In a boiler, corrosion can also occur if the water’s pH is too high or too low. Caustic, corrosive damage occurs when a concentrated caustic substance dissolves and generates a high pH. 

When the boiler water’s pH is too low, acidic corrosion begins to form. Acidic corrosion can also be caused by cleaning supplies that are not handled properly.

How to Prevent and Control Boiler Corrosion

Even though boiler corrosion cannot be completely avoided, it is still vital and manageable to remove the factors that favour it. Your boiler will have the longest possible service life if you take proactive measures to stop corrosion from spreading.

You can keep track of the boiler’s performance and its supporting machinery with a routine boiler inspection program. Keep an eye out for things like variations in the water’s pH and temperature in the feed tank.

Check the system frequently for leaks and look for any indications of corrosion. Daily pH, hardness, and chemical checks should be made on boiler water, feed water, make-up water, and condensate.

Conclusion

You can get a heads-up on issues by looking at how these variables have changed over time. Your maintenance team may be relieved of the responsibility of monitoring by signing a contract with a reputable and professional chemical treatment business.

The majority of problems can be solved with adequate chemical treatment and gas removal using a deaerator or feed water tank. 

Regular boiler maintenance will provide you the chance to maintain your boiler clean and free of scale, rust, and corrosion while also alerting you to potential issues.

Climate Experts can take care of your boiler repair in Pickering! We’re a Canadian-owned and -operated company that installs, services, and maintains all major furnace and air conditioner brands. Call us anytime, as we’re available to serve you with 24/7 emergency service!

We often take the air around us, indoors and out, for granted. We assume that because we can’t see it, there must not be anything wrong with it. Unfortunately, that’s not always the case. The air inside our homes and businesses can be more polluted than the air outside.

Indoor air pollution is caused by a variety of sources, including:

• Chemicals used in cleaning products, paint, and other building materials
• Cigarette smoke
• Dust mites
• Gases from cooking stoves and other combustion appliances
• Mold and mildew

These pollutants can build up to levels that pose serious health risks. 

Luckily, there’s plenty you can do to improve your indoor air quality. Some solutions are simple, like opening a window to let in the fresh air. Others are more involved, like installing an air purifier or ventilator.

Whatever steps you take, improving indoor air quality is essential for your health and those you share your space with.

In today’s article, let’s take a closer look at your furnace and whether or not it’s impacting your indoor air quality. Here’s what you need to know:

Do Furnaces Affect Indoor Air Quality?

When it comes to indoor air quality, you may not think that your furnace has much impact. However, the truth is that your furnace can significantly affect the quality of your indoor air.

How Furnaces Affect Indoor Air Quality

One of the biggest ways that furnaces can affect indoor air quality is through the emission of carbon monoxide. Carbon monoxide is a colourless and odourless gas that can be very dangerous if it builds up in enclosed spaces. Furnaces can emit carbon monoxide if they are not properly ventilated or if they are not functioning correctly. 

Another way that furnaces can affect indoor air quality is by circulating dust and other particles through your home. If your furnace filter is dirty, it can circulate dust and other particles through your home, worsening allergies and respiratory problems. Change your furnace filter regularly to help improve the quality of your indoor air.

Finally, furnaces can also dry out the air in your home, leading to various problems. Dry air can cause nosebleeds and static electricity, and it can also make it difficult to breathe. If you have a furnace, it’s essential to use a humidifier to help add moisture to the air and improve indoor air quality.

Improving Your Indoor Air Quality

In addition to regularly changing your furnace filter, you can also have your furnace checked by a professional to ensure that it is functioning properly. You can also use a humidifier to add moisture to the air and improve indoor air quality. Finally, you can also try to reduce the dust and other particles in your home by regularly vacuuming and dusting.

The Bottom Line

Furnaces can affect indoor air quality in a number of ways. First, they can emit pollutants that can contaminate the air. Second, they can circulate dust and other particles that contaminate the air. Finally, they can create condensation that can lead to mould growth. All of these factors can contribute to poor indoor air quality. This is why it’s important to ensure that your furnace is well-maintained. 

If you are looking for furnace repair services in Pickering, we can help you. Climate Experts is a Canadian-owned and operated company serving the Durham region, GTA and the surrounding area. We install, service and maintain all major brands of furnaces and air conditioners. Our services are available 24/7 and for emergencies. You can count on us to get your HVAC system up and running in no time! Contact us today to learn more and get started.

Heat pumps and heat boilers are two different ways of heating your home. Both have their own advantages and disadvantages, so it can be difficult to decide which one is right for you. To help simplify things, we thought it would be useful to put together a brief article about this subject. If this is something that you’re interested in learning more about, here are heat pumps and heating boilers.

What is a Heat Pump?

A heat pump is a device that transfers heat energy from one location to another, often from a colder to a warmer location. The term “heat pump” is often used to refer to a household appliance that transfers heat from the inside of the house to the outside, or from one room to another. Heat pumps are also used in industrial and commercial settings to transfer heat from one area to another.

Heat pumps use either a refrigerant or an absorption material to absorb heat from one area and release it to another. The refrigerant or absorption material is contained in coils that are either inside or outside the area being heated or cooled. When the refrigerant or absorption material absorbs heat, it changes state from a liquid to a gas or vice versa. This change of state allows the heat to be transferred to another area.

There are two main types of heat pumps: air-source and ground-source. Air-source heat pumps use the air as the heat source and sink. Ground-source heat pumps use the earth as the heat source and sink. Air-source heat pumps are more common than ground-source heat pumps, but ground-source heat pumps are more efficient because they have a lower operating cost.

What is a Heat Boiler?

A heat boiler is a device used to generate heat for a variety of purposes, such as space heating, water heating, or process heating. The most common type of heat boiler is the steam boiler, which uses steam to heat water and generate thermal energy. Other types of heat boilers include hot water boilers, gas-fired boilers, oil-fired boilers, and electric boilers.

How Do Heat Pumps and Heat Boilers Differ?

There are a few key differences between heat pumps and heat boilers.

First, heat pumps are more efficient than heat boilers. They can convert up to 3 times more energy into useful heat.

Second, heat pumps work more effectively in colder climates. They can extract more heat from the environment, which is important in climates where the temperatures regularly drop below freezing.

Third, heat pumps are quieter than heat boilers. They produce less noise, which is important if you are looking for a unit that will be installed in a living space.

Finally, heat pumps are more expensive to install than heat boilers. However, they are also more energy efficient, so they will save you money in the long run.

Conclusion

Heat pumps and heat boilers work differently to heat your home. A heat pump uses electricity to move heat from one place to another, while a heat boiler uses natural gas or oil to heat water, which then creates heat for your home. 

Which one you choose depends on your needs and what is available in your area. A heat pump is more efficient than a heat boiler, but a heat boiler is less expensive to install. Talk to a professional about what would be the best option for you.

Climate Experts provides top-quality services for boilers in Pickering. Our professional heating and cooling technicians will ensure your home is adequately ventilated, all for fair prices. Visit our website today to request a free estimate!

When buying a furnace for your home, a key consideration is to ensure that it fits perfectly in your home. However, not all homeowners are aware that an oversized furnace can have adverse effects that may compromise comfort and efficiency inside the property. Check out the common issues you may encounter when you have an oversized furnace:

Lower Home Efficiency

One of the most common issues with oversized furnaces is that they can lower your home’s efficiency. When a furnace is too large for your home, it short cycles, turning on and off more frequently than it should. This causes the furnace to work harder than it needs to, leading to decreased efficiency and increased energy costs.

Inadequate Heat Output

An oversized furnace can also lead to inadequate heat output, leaving your home feeling cold and uncomfortable. This is because an oversized furnace can’t produce enough heat to adequately warm your home, which can result in the furnace working harder than it should. This can also lead to increased energy costs and decreased comfort levels.

Poor Air Quality

An oversized furnace can also lead to poor air quality in your home. When a furnace is too large, it can cause the air to become stagnant, which can lead to dust and other pollutants accumulation. This can lead to respiratory problems and other health issues.

Reduced Lifespan and More Frequent Disrepair

An oversized furnace can also lead to a reduced lifespan and more frequent disrepair. This is because when a furnace is too large, it can put unnecessary stress on the components, leading to them wearing out more quickly. It can also lead to more frequent repairs and replacements.

What To Do if You Have An Oversized Furnace

If you have an oversized furnace, there are a few things that you can do to address the issue. The first is to have a professional furnace technician come to your home to inspect your furnace and make recommendations for how to address the problem.

Another option is to upgrade to a smaller furnace. This can be a more expensive option, but it can be worth it in the long run. Upgrading to a smaller furnace can lead to improved energy efficiency, improved air quality, and a longer lifespan for your furnace.

Other Tips to Choose the Right-Sized Furnace for Your Home

If you are considering upgrading to a smaller furnace, there are a few things that you can do to ensure that you choose the right-sized furnace for your home.

First, you should size your furnace according to the square footage of your home. You can use a furnace sizing calculator to help you determine the right size for your home.

You should also consider the climate where you live. If you live in a colder climate, you will need a larger furnace than if you live in a warmer climate.

Finally, you should also consider your family’s needs. If you have a large family, you will need a larger furnace than if you have a small family.

To Sum Up

It’s important to make sure your furnace is the right size for your home. An oversized furnace can cause a number of problems, including increased energy costs, shortened furnace life, and uneven heating. If you’re not sure what size furnace you need, talk to a heating and cooling professional.

For reliable furnaces in Pickering, trust only the Climate Experts. We are a Canadian-owned company serving the Durham region, GTA and the surrounding area. We install, service and maintain all major brands of furnaces and air conditions 24/7. Get in touch with us. 

If your furnace starts acting up, it can be tempting to try to fix the problem yourself. After all, it’s just a machine, right?

Wrong.

While furnaces are relatively simple machines, they’re also very complex and delicate. One wrong move while trying to fix a furnace can cause serious damage, or even start a fire.

That’s why we’ve put together this comprehensive guide on the seven most common furnace problems you shouldn’t try to fix on your own. By the end of this guide, you’ll know exactly when to call in a professional for help.

So, without further ado, let’s get started.

1. Cracked Heat Exchanger

One of the most common and potentially dangerous furnace problems is a cracked heat exchanger. The heat exchanger is a key component of your furnace, and its job is to transfer heat from the burning gas to the air that’s circulated throughout your home. 

If the heat exchanger cracks, it can leak carbon monoxide into your home. Carbon monoxide is a colourless, odorless gas that can be deadly if inhaled. So, if you think your heat exchanger might be cracked, it’s important to call in a professional right away. 

2. Faulty Gas Valve

Another common furnace problem is a faulty gas valve. The gas valve is responsible for regulating the flow of gas to the burners. If the gas valve is faulty, it can cause the furnace to overheat, which can be dangerous. 

If you think your gas valve might be faulty, it’s important to call in a professional right away. 

3. Problem with the Blower Motor

If your furnace is having trouble starting up, or if the blower motor is making strange noises, it could be a sign of a problem with the blower motor. The blower motor is responsible for circulating the air through the furnace. 

If the blower motor is having trouble, it could be because of a problem with the bearings, the motor itself, or the belt that connects the motor to the blower. 

4. Clogged Filter

A clogged filter is one of the most common furnace problems. The filter is responsible for trapping dirt, dust, and other particles that could damage the furnace. 

If the filter is clogged, it can restrict the airflow to the furnace, causing it to overheat. It can also cause the furnace to run less efficiently, which will increase your energy bills. 

5. Tripped Circuit Breaker

If your furnace keeps shutting off, it could be because the circuit breaker has been tripped. This is a safety feature that prevents the furnace from overheating. To reset the breaker, simply flip it to the “off” position and then back to “on.” If the breaker trips again, there could be a more serious problem with your furnace. In this case, you’ll need to call a professional for help.

6. Frozen Condensate Line 

A frozen condensate line is another common furnace problem. The condensate line is responsible for carrying away water that condenses on the heat exchanger. If the line freezes, it can cause water to back up and flood the furnace. If you suspect that the condensate line is frozen, you’ll need to thaw it out. To do this, you can use a hair dryer or a heat lamp. Once the line is thawed, you’ll need to check for leaks and repair any that you find.

7. Damaged Thermostat 

A damaged thermostat is another common furnace problem. The thermostat is responsible for controlling the furnace, so if it’s damaged, the furnace may not operate properly. If the thermostat is damaged, you’ll need to replace it. This is a relatively simple task that you can do yourself, but you’ll need to ensure that you get the right thermostat for your furnace.

Conclusion

There are a few common furnace problems that you shouldn’t try to fix on your own. These problems can be dangerous and may cause further damage to your furnace. If you’re not sure how to fix the problem, it’s best to call a professional.

Climate Experts is a Canadian-owned and -operated company that provides services to the Durham region, the GTA, and the surrounding regions. We install, repair, and maintain furnaces and air conditioners from all major manufacturers. Since we are available 24/7, we can handle your emergency requests swiftly and effectively. Contact us for furnace maintenance. 

In any home, the right temperature matters because it helps make the environment comfortable. Using an air conditioner is relatively straightforward for cooling, but using a furnace for heating is often tricky because it’s difficult to gauge how much heat is needed to warm the home. However, furnace performance can help with this, especially since it’s easy to spot issues in one.

A few things can cause a furnace to underperform, and they usually have to do with the furnace itself or the ductwork. However, some parts do more work than the others, such as the humidifier filters. These filters are responsible for removing impurities from the air, so keeping them clean and in working condition is essential. However, few homeowners know how to change them, much less when to do the task. For this reason, we’ll discuss the details in this article.

How a Furnace Works

A furnace is a mechanical device that uses a heat source to warm the air in the home. The heat source is usually a gas, electricity, or oil, and it’s contained in a combustion chamber. The heat is then transferred to the air through a heat exchanger that is usually made of metal.

The air is then forced through the ductwork into the house’s rooms. As the air enters the furnace, it passes through a filter that catches any impurities in the air. The air is then forced through the heat exchanger, which transfers heat to the air through the ductwork into the house’s rooms.

The Role of the Humidifier Filter

The furnace’s humidifier filter is located in the humidifier, a device that adds moisture to the air. The humidifier filter is responsible for removing impurities from the water used to moisten the air. Aside from catching particles, the humidifier filter also prevents the growth of bacteria and mould in the humidifier.

Many things can cause the humidifier filter to wear down, such as exposure to dust, chemicals, water, and excessive heat. The last one is particularly troublesome because it can cause the filter to warp. A warped humidifier filter can cause the furnace to work harder and use more energy, leading to higher utility bills.

The Role of the Evaporator Pad

The evaporator pad is also located in the humidifier and is responsible for absorbing the water to moisten the air. It is usually made of foam material, and its typical lifespan is about one year. The evaporator pad can also become warped over time, making it difficult for water to absorb.

As a result, water can leak from the humidifier, causing damage to the furnace and potentially leading to mould growth. Warped evaporator pads can also cause the furnace to work harder and use more energy, leading to higher utility bills.

When to Change Your Furnace’s Humidifier Filter

For any furnace, changing its humidifier filter should be done at least once a year. This is because the filter can become clogged with dust and other particles, making it difficult for the humidifier to function correctly.

If you have pets or live in a dusty area, you may need to change the filter more often. In this case, you may need to change the humidifier filter every three months.

How to Change the Humidifier Filter

To change your furnace’s humidifier filter, you’ll need to turn off the furnace. You must also disconnect the water tube and replace the humidifier filter or evaporator pad with new ones.

Once done, replace the filter or evaporator pad, reattach the water tube, and then the cover. Finally, turn the furnace on to see if the new filter or evaporator pad is working correctly.

Conclusion

A furnace’s humidifier filter is crucial because it improves your home’s air quality by reducing the amount of dust and other allergens in the air. Since a furnace’s humidifier filter is constantly working to improve the air quality in your home, you must change it regularly to ensure it works properly. All that matters is doing it correctly to prevent further problems.

Climate Experts provides top-quality services for furnace repair in Pickering. Our professional heating and cooling technicians will ensure your home is adequately ventilated, all for fair prices. Visit our website today to request a free estimate!

Water heaters are a vital part of any home, providing hot water for bathing, cooking, and cleaning. However, water heaters can develop leaks over time. A water heater leaking from the bottom often indicates that the tank has corroded and needs to be replaced.

There are a few reasons water heaters leak from the bottom. 

Temperature & Pressure (T&P) Valve

One of the most common reasons for a water heater to leak from the bottom is a faulty or damaged Temperature & Pressure (T&P) valve. The T&P valve is a safety feature that helps to release excess pressure and temperature from the water heater. If the T&P valve is damaged, it may not be able to release pressure, causing the water heater to leak properly.

Drain Valve

Another common reason for a water heater to leak from the bottom is a faulty or damaged drain valve. The drain valve is a valve that is used to release water from the water heater. If the drain valve is damaged, it may not be able to properly release water, causing the water heater to leak.

Issue Inside the Tank

One of the most common reasons for a water heater to leak from the bottom is an issue with the tank itself. The tank is the part of the water heater that holds the water. If there is an issue with the tank, it may not be able to hold the water properly, causing the water heater to leak.

Inlet and Outlet Connections

The water supply lines that provide cold water to the tank and hot water to the plumbing system can sometimes become loose and cause leaks. Tightening the connections is a simple fix that most people can do. However, if the leak persists, it may be necessary to replace the water lines.

What to Do If the Water Heater Is Leaking

• Turn Off the Water Supply

The first thing you should do if your water heater is leaking is to turn off the water supply. The water supply lines are located above the tank and will have handles that allow you to turn them off. Once you have turned off the water supply, the water will stop flowing into the tank.

• Turn Off Gas or Power

If your water heater is powered by gas or electricity, you will need to turn off the gas or power to the unit. For gas water heaters, there will be a knob on the side of the unit that you can turn to the “off” position. For electric water heaters, you will need to flip the switch on the circuit breaker that powers the unit.

• Call a Professional

If you have a leaking water heater, it is best to call a professional to repair the unit. Water heaters can be very dangerous and you do not want to attempt to repair the unit yourself.

To Sum Up

There are a few reasons your water heater may be leaking from the bottom. Most likely, it is due to a problem with the pressure relief valve, the drain valve, or a crack in the tank. 

If you notice a leak, it’s important to shut off the power to the water heater and call a plumber as soon as possible. A water heater leak can cause serious damage to your home, and it’s best to have a professional take a look at it to determine the best course of action.

Climate Experts installs, services, and maintains all major brands of tankless water heaters in Pickering and air conditioners 24/7/ We are licensed, bonded, and insured. Get in touch with us. 

When the weather outside starts to get chilly, the last thing you want is for your furnace to quit working. If your furnace is more than 15 years old, it may be time to start thinking about a new furnace installation.

There are many benefits to having a new furnace installed in your home. Here are just a few of them:

1. Improved Heating Efficiency

One of the biggest benefits of having a new furnace installed is improved heating efficiency. New furnaces are much more efficient than older models, meaning that they use less energy to generate the same amount of heat. This can lead to significant savings on your energy bills, as well as reducing your carbon footprint.

2. Enhanced Comfort

Another big benefit of having a new furnace installed is the enhanced comfort it can provide. New furnaces are designed to evenly distribute heat throughout your home, meaning that you can say goodbye to cold spots and drafts. Additionally, newer furnaces are much quieter than older models so you can enjoy a peaceful home without the constant drone of a furnace.

3. Increased Lifespan

When you have a new furnace installed, you can also expect an increased lifespan for the unit. This is due to the fact that new furnaces are built with higher quality materials and components than older models. Additionally, new furnaces come with better warranties than older models, so you can be confident that your furnace will last for many years to come.

4. Increased Home Value

One of the best things about having a new furnace installed in your home is the fact that it can actually increase your home’s value. If you’re thinking about selling your home in the near future, a new furnace can be a major selling point for potential buyers. Additionally, if you plan on staying in your home for many years to come, a new furnace can be a great investment that will pay off in the long run.

5. Lower Maintenance Costs

If you’re like most people, you probably don’t enjoy paying for maintenance and repairs on your home’s HVAC system. However, it’s important to remember that maintaining your furnace can actually save you money in the long run. A new furnace will likely require less maintenance than an older model, which means you can save money on repairs and upkeep.

What Are the Things to Consider before a New Furnace Installation

When it comes to your home’s heating, there’s no question that you want to make sure you have a reliable and efficient system in place. And if you’re in the market for a new furnace, there are a few things you’ll want to keep in mind before making your purchase. Here are a few things to consider before having a new furnace installed.

First, you’ll want to consider the size of the unit. Make sure to get a furnace that’s the right size for your home. If it’s too small, it won’t heat your home effectively. If it’s too large, it will use more energy than necessary, resulting in higher utility bills.

Next, you’ll want to think about the type of fuel you want to use. Furnaces can run on electricity, natural gas, propane, or oil. Each has its own advantages and disadvantages, so do your research before making a decision.

Finally, you’ll want to consider the cost of the unit and the installation. Furnaces can range in price, so it’s important to get a few quotes before making a purchase. Be sure to factor in the cost of installation as well.

Conclusion

There are many benefits to having a new furnace installation in your home. If you are considering a new furnace installation, be sure to consult with a professional to find the best option for your home.

Looking for a reliable and affordable furnace installation in Pickering? Climate Experts has you covered! Our team of certified HVAC technicians are experts in furnace installation and can help you choose the right unit for your home or business. We understand that furnace installation can be a daunting task, which is why we offer a free in-home consultation to assess your needs and help you choose the best unit for your space. Let us take the stress out of furnace installation for you! Contact us today to get started!

If your furnace stops working, it’s important to troubleshoot the issue as soon as possible. After all, you rely on your furnace to keep your home warm during the colder months. There are several potential furnace problems that could be to blame, but fortunately, most of them are relatively easy to fix.

In this comprehensive guide, we’ll show you seven expert solutions to common furnace problems. We’ll cover everything from troubleshooting a pilot light that won’t stay lit to fixing a furnace that’s blowing cold air. So whether you’re a first-time furnace owner or a seasoned veteran, this guide will help you get to the bottom of your furnace problems and get your heat back on as quickly as possible. Let’s get started!

Here are seven expert solutions to furnace problems:

1. Check the Pilot Light

One of the most common furnace problems is a pilot light that has gone out. If your furnace won’t turn on, check to see if the pilot light is lit. If it’s not, relight it according to the instructions in your furnace’s owner’s manual.

2. Clean or Replace the Furnace Filter

A dirty furnace filter can restrict air flow, causing your furnace to work harder than it needs to. As a result, your furnace may not heat your home as efficiently as it could. To prevent this problem, clean or replace your furnace filter at least once a month.

3. Check the Thermostat

If your furnace won’t turn on, it could be because the thermostat is set to the “off” position. Make sure the thermostat is set to “heat” and that the temperature is set above the current room temperature.

4. Inspect the Blower Belt

If the furnace is running, but the air isn’t circulating, the problem could be a broken blower belt. Inspect the belt to see if it’s broken or frayed. If it is, you’ll need to replace it.

5. Clean the Burners

If the furnace is running, but the air isn’t getting hot, the problem could be dirty burners. Over time, dirt and dust can build up on the burners, causing them to work less efficiently. To clean the burners, turn off the furnace and remove the access panel. Then, use a brush to clean the burners.

6. Check for Leaks

If the furnace is running, but the air isn’t getting hot, the problem could also be a gas leak. To check for a gas leak, turn off the furnace and smell for gas near the furnace. If you smell gas, call your gas company immediately.

7. Call a Professional

If you’ve checked all of the above and the furnace is still not working, it’s time to call a professional to take a look at it. An HVAC contractor will be able to troubleshoot the problem and let you know what needs to be done to fix it.

Conclusion

It is important to be aware of the most common furnace problems in order to keep your home warm and comfortable during the colder months. By following the expert solutions provided in this guide, you can be sure that your furnace will be running smoothly and efficiently all winter long.

If you’re looking for HVAC repair in Pickering, Oshawa, Ajax, and Toronto or whether you have other home heating systems concerns, we can help. Climate Experts is a Canadian-owned and -operated company serving Durham Region, GTA, and the surrounding area. We install, service, and maintain all major brands of furnaces and air conditioners, available to help you with 24/7 emergency service quickly and promptly. Call us today at 1-855-241-7171 for a free estimate.