Loading...

Mitsubishi – 18k BTU – FH-Series H2i Outdoor Condenser w/ Base Pan Heater – Single Zone Only

SKU: MUZ-FH18NAH2 Categories: ,

$0.00

This condenser is equipped with inverter technology and an electronic linear expansion valve. By adjusting compressor speed and refrigerant flow, the output of the unit can be matched to the zone for precise temperature control and improved efficiency.

Features

Please Note: Due to the limited availability of this model, these products will be sold in systems only. Should you have any questions please contact our sales center for alternate options.
    • Precision Temperature Control Technology
    • This condenser is equipped with inverter technology and an electronic linear expansion valve. By adjusting compressor speed and refrigerant flow, the output of the unit can be matched to the zone for precise temperature control and improved efficiency.
    • H2i Technology
    • Low or negative ambient temperatures won’t bother the FH Series. They are rated for 100% heating capacity at 5 degrees F and 73% at -13 degrees F.
    • Hot-Start
    • Mitsubishi’s hot-start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
    • Integrated Base Pan Heater
    • These FH Series outdoor condensers have a factory-installed base pan heater in the drain pain. This prevents condensate from freezing and damaging the unit in frigid climates.
    • Product Compatible With
    • Mitsubishi MSZ-FH18NA2 Wall Mounted Indoor Unit
Product Note
  • This product requires the Mitsubishi MSZ-FH09NA Wall Mounted Mini Split Indoor Unit and the following accessories for installation:
  • Line Set – This double insulated tubing transfers refrigerant efficiently between your outdoor condenser and indoor units.
  • Drain Tubing – Drain tubing facilitates the reliable and effective removal of condensate from your system. It connects your indoor units to drain locations of your choosing.
  • Disconnect Box & Electrical Whip Kit – The Disconnect Box & Whip Kit provides a safe and simple way to connect your outdoor condenser to your fuse box.
  • Connecting Wire – This durable, insulated wire provides power to your indoor units from your outdoor condenser.
  • Outdoor Condenser Plastic Pad (Optional) – This pad provides an even surface, free of debris, on which to place your outdoor condenser.
  • Wall Bracket (Optional) – A simple and sturdy way to mount your outdoor condenser off of the ground.
Adding these accessories to your order will provide a complete, ready-to-install mini split system.

Specifications

General Information
Type
Outdoor Condenser
Product Line
FH-Series
Operating Mode
Heating and Cooling
Maximum Number of Zones
1
Multi-Zone Compatible
No
Refrigerant Type
R-410A
Installation Location
Outdoor
Base Pan Heater Included
Yes
Performance
Cooling BTU
18000
Maximum Sound Level
55 dB
Low Ambient Heating
Yes
Minimum Outdoor Temperature for Heating
-13 F
Minimum Outdoor Temperature for Cooling
14 F
Electrical Data
Voltage
208/230 Volts
Phase
1
Frequency
60 Hz
Recommended Breaker Size
20 Amps
Dimensions
Maximum Line Length
100 Feet
Gas Connection Size
1/2 Inch
Liquid Connection Size
1/4 Inch
Product Height
34 5/8 Inches
Product Width
33 1/16 Inches
Product Depth
13 Inches
Product Weight
124 Pounds
Certifications
ETL Listed
Yes
AHRI Certified
Yes
Warranty Information
Parts Warranty
5 Years
Compressor Warranty
7 Years

Manuals

Related products