Climate Experts · All-electric heating solutions
All-electric heating. Planned for your home.
Moving away from gas should begin with a clear understanding of your home—not a long list of equipment. Climate Experts helps you compare electric boilers, air-to-water heat pumps and compatible heat-pump systems around the comfort you want, the heating distribution you already have and the budget you need to work within. Our Pickering-based team brings practical hydronic and heating experience to that conversation.
- Locally owned since 2012
- Emergency service within 24 hours
- Financing available
Get your free quote
Share a few details about your home. We will arrange an assessment and a clear, written quote.
Prefer to talk?
905-492-7171
What size electric boiler or heating coil could your home need?
Not sure which size to discuss? Enter the living area above ground, excluding the basement, and the home’s age for a rough starting range. Our Pickering-based team then checks the construction, heating distribution and available electrical service before recommending your system.
Compare electric heating capacity and electricity use
View the general sizing chart
| Home age / envelope | Heating output | Cooling load |
|---|---|---|
| Before 1960 | 35–50 | 14–22 |
| 1960–1989 | 28–42 | 12–19 |
| 1990–2009 | 22–34 | 10–17 |
| 2010 or newer | 18–28 | 9–15 |
| Deep retrofit / high performance | 12–22 | 7–12 |
These broad website factors are assumptions for initial discussion. They are not measured age-based performance data or a certified sizing procedure.
A starting point for a conversation. Home age and floor area cannot establish the final size. Basement area is excluded from this input, but its heat loss and any conditioned basement rooms still belong in the final whole-home assessment. High ceilings, large windows, exposure, renovations, insulation, leakage and ducts can move the result outside this range.
Final equipment selection requires a heat-loss/heat-gain assessment using an appropriate method such as CSA F280. Electric boilers need suitable water temperatures, flow, pumps and controls. Duct coils need verified airflow, compatible controls and safety interlocks. We confirm the electrical supply, service capacity and equipment listing with the appropriate electrical professional before final selection. This calculator excludes domestic hot-water recovery, snow melt and other added loads. Your entries stay in your browser and are not submitted automatically.
Keep the comfort you value. Understand what needs to change.
Perhaps you enjoy the warmth of your radiators but want to explore a different heat source. You may be replacing an older furnace, planning a renovation or looking for heating and cooling without a gas backup. We start by listening to what works in your home and what you would like to improve. That gives the equipment discussion a useful direction.
Climate Experts has served our community since 2012. Our experience with boilers, hydronic heating, air handlers and heat pumps allows us to look beyond a simple like-for-like replacement. We explain how the proposed heat source, distribution and controls would work together, and identify the practical changes before you commit.
Get a clear, written quote for your all-electric heating system.
Free in-home assessment · Financing available through Financeit · Ask us about current rebates and manufacturer offers.
Which all-electric approach suits your heating system?
“All-electric” describes the energy source; it does not identify one type of equipment. An electric boiler and a heat pump both use electricity, but they produce and distribute heat differently. The right starting point is how your home needs to be heated and whether cooling is also part of your goal.
| Heating approach | How it works | What we review |
|---|---|---|
| Electric boiler | Electric resistance elements heat water for a compatible hydronic system. | Heat loss, electrical demand, existing piping and emitters, controls and operating cost. |
| Air-to-water heat pump | Moves heat from outdoor air into a water-based heating system. | Cold-weather output, required water temperature, emitters, flow, controls and supplementary heat. |
| Ducted all-electric heat pump | An outdoor heat pump works with a compatible indoor air handler and ductwork. | Heating and cooling loads, airflow, cold-weather capacity and any electric supplementary heat. |
| Ductless heat pump | Compatible indoor units serve rooms or zones without a full central duct network. | Coverage of every required space, indoor placement, zoning and winter capacity. |
A gas furnace paired with an electric heat pump is a dual-fuel arrangement. It can be an option to compare, but it is not all-electric while the gas furnace remains part of the heating strategy. An all-electric plan must account for any supplementary heat without relying on a gas appliance.
For detailed indoor-unit and air-to-air heat-pump choices, visit Heat Pumps and Ductless Mini-Splits. This page focuses on the conversion decision, electric boilers and air-to-water options.
Electric boilers for radiators & in-floor heating.
An electric boiler heats water using electric resistance elements. In a suitable installation, that water circulates through radiators, radiant floors or other compatible hydronic equipment. For a homeowner who values water-based heating, it is an option to review when replacing a gas boiler or planning changes to an existing system.
Retain suitable distribution
We assess the piping, circulation and heating emitters before confirming what can be reused. Changing the heat source does not automatically make every existing component suitable.
Match the heating requirement
The boiler capacity is selected around the home’s heating load and system requirements. Floor area or the rating of the old boiler alone is not enough.
Plan controls & electrical supply
We review staged operation, zoning and the electrical work needed for the proposed equipment as part of the full installation scope.
An electric boiler does not need a combustion exhaust vent for its own operation. It still needs appropriate electrical supply, installation space, hydronic components and controls. Removing an older gas appliance also involves the existing connections and the agreed decommissioning work.
Electric resistance heating and heat-pump heating should not be treated as equally efficient ways of using electricity. A boiler creates heat from electricity; a heat pump moves heat and can deliver more heat per unit of electricity under suitable conditions. We discuss the operating-cost implications rather than assuming a lower installation cost means lower monthly bills.
Air-to-water heat pumps: electric heating for a hydronic home.
An air-to-water heat pump takes heat from outdoor air and transfers it into water for the heating system. That creates an opportunity to pair heat-pump technology with suitable radiant floors, radiators, fan coils or hydronic air handlers. The important question is whether those emitters can keep your rooms comfortable at the water temperatures the selected heat pump can supply.
A radiator designed around a hotter boiler-water temperature may deliver less heat at a lower temperature. We review room-by-room requirements and the output of the existing emitters before proposing a conversion. Some may be suitable; others may need changes. Insulation or other home improvements can also change the heating load and the options worth considering.
Radiant floors & panel radiators
Review the required water temperatures and output against each room’s load. A suitable low-temperature arrangement can support heat-pump performance.
Fan coils & air handlers
Compatible water coils can transfer heat into room air. Cooling-capable arrangements need equipment, controls, insulated piping and condensate handling suited to that use.
Supplementary heating
Review the selected heat pump’s capacity at the local design conditions and whether electric supplementary heat is needed. The controls must coordinate the complete arrangement.
The outdoor unit is only one part of the system. Water flow, circulation, any required buffer arrangement, zoning and freeze protection must suit the equipment and installation. We assess these details together so you understand why the proposal contains more than a heat-pump model number.
Can air-to-water equipment also provide cooling?
Where the selected equipment and distribution are designed for cooling, an air-to-water heat pump can supply chilled water to suitable fan coils or air handlers. Ordinary heating radiators and radiant floors should not simply be switched to cold water. Humidity, condensation, condensate drainage and vapour-sealed piping insulation require a proper cooling design. We explain the suitable approach for your home instead of assuming every hydronic heating system can cool.
What can stay—and what needs review—in your existing home?
A useful all-electric assessment starts with the home you have today. We look at the existing heating system, the rooms it serves, available space and the comfort issues you want addressed. That helps distinguish necessary changes from work that may not add value to your project.
A home with ductwork
Review the ducts and airflow for a compatible heat-pump and air-handler arrangement. Reusing ductwork is an assessment, not an automatic promise.
A home with hydronic heating
Review radiator or floor output, piping, water temperatures and controls before selecting an electric boiler or air-to-water arrangement.
A home without central ducts
Compare ductless or other suitable distribution options. Account for bedrooms, bathrooms and other spaces that need heat, not just the main living area.
Rooms that need different control
Discuss actual comfort priorities and a compatible zoning plan. More thermostats alone cannot correct an undersized emitter or a poor distribution layout.
Renovations can be a good time to review equipment locations, piping routes and the effect of a new system on finished rooms. We identify access and related finishing work in the proposal so the installation is planned alongside the work already happening in your home.
Heating conversion also needs to be distinguished from converting the entire property away from gas. A gas water heater, fireplace or other appliance may still remain. We review the agreed scope and any related hot-water decisions before you make assumptions about cancelling a gas service.
Electrical capacity, winter comfort & realistic costs.
The goal is a system you understand before installation and can live with comfortably afterward. The review needs to account for the coldest heating conditions, the electrical work and the costs of both installation and operation.
Heating & cooling loads
Use an appropriate load assessment and the selected equipment’s performance data. The nominal size or brochure efficiency alone does not establish winter heating capacity.
Electrical service & circuits
Review the proposed equipment with the home’s other electrical loads. A qualified electrical assessment determines circuit and service requirements; spare breaker spaces alone do not prove sufficient capacity.
Operating-cost assumptions
Compare electricity and any existing fuel costs, heat-pump performance, water temperatures and supplementary heat use. Savings vary with the home and the chosen system.
Installation scope & budget
Include necessary distribution changes, controls, electrical coordination and associated work. Discuss priorities early so equipment selection stays connected to your budget.
We do not assume every conversion needs a service upgrade, and we do not assume the existing supply will be sufficient. That decision follows the electrical assessment. The proposal identifies which work and coordination are included and which responsibilities belong to another trade.
Cold-weather performance is model-specific. An all-electric plan may include electric resistance backup or another appropriate electric supplementary arrangement. We discuss when it is expected to operate and how the controls support comfort. Both gas and electric heating equipment can depend on electrical power; an all-electric system does not keep running automatically during an outage.
If you want to explore an incentive, eligibility and available funding must be checked for the actual equipment, property and program at the time of application. We do not build an unverified rebate or savings amount into the proposal.
All-electric installation & replacement, with a clear path forward.
1. Understand the goal
Discuss why you are considering all-electric heating, what you value about the existing system and the budget you want us to consider.
2. Review the home
Assess loads, distribution, locations, electrical requirements and the selected equipment’s practical performance.
3. Agree on the proposal
Confirm the equipment and included work. We offer fixed pricing from start to finish, with no hidden fees or additional costs for the approved quoted installation scope.
4. Complete & explain
Check operation as appropriate to the system and explain the controls, supplementary heat and care relevant to your installation.
You should know what is being replaced, what is retained and how the proposed system will operate. Where other trades are required, their responsibilities and coordination are identified. We want the installation conversation to leave you with a clear scope rather than a collection of unrelated options.
Financing is subject to credit approval. Review the offered terms and total borrowing costs before accepting an agreement.
Service, repairs & maintenance for the complete system.
If an electric boiler or heat-pump system is not performing as expected, tell us the make, model, controls involved and what has changed. A comfort problem may involve the heat source, circulation, air delivery, sensors or the control arrangement. We review the system before proposing a repair rather than replacing parts based on the symptom alone.
We explain the findings and proposed work before agreed repairs proceed. Maintenance requirements depend on the equipment and installation, including applicable coils, filters, hydronic components, controls and supplementary heat. We review the selected manufacturer’s instructions and your installed arrangement.
Ask us about Maintenance 365 for your home. Eligible matched heat-pump/air-handler coverage and specialized boiler or hydronic add-ons are reviewed individually. The enrolled equipment, scope and price are confirmed so you understand what the plan includes.
Explore your radiator and water-temperature options.
Check a radiator’s lower-temperature output or compare an existing cast-iron radiator before discussing the complete hydronic system with our team.
Our customers. Our community.
Proud of our work. Grateful for your reviews.
Our five-star customer reviews are a source of pride for Climate Experts. We want the experience behind our name to reflect the care we put into the work.
Questions about moving to all-electric heating.
Still have a question?
Call 905-492-7171 and tell us what you need. Our team will explain the next step and confirm availability.
Is an electric boiler the same as an air-to-water heat pump?
No. An electric boiler creates heat using resistance elements. An air-to-water heat pump moves heat from outdoor air into water. They have different electrical, operating and system-design requirements.
Can I keep my existing radiators?
Possibly. We assess room loads and radiator output at the proposed water temperatures, along with the piping and controls. Some emitters may work; others may need changes.
Can an electric boiler replace my gas boiler?
It is an option to review for a suitable hydronic system. Heating load, electrical supply, distribution and operating cost all need assessment before equipment is selected.
Will air-to-water heating also cool my house?
Only with equipment and distribution designed for cooling. Appropriate fan coils or air handlers, humidity control, condensate handling and insulated piping are part of that review. Ordinary heating radiators are not assumed to be cooling equipment.
Do I have to upgrade my electrical service?
Not necessarily. A qualified assessment considers the new equipment and the home’s other loads. We identify the necessary electrical work rather than assuming an upgrade from panel size or spare breaker spaces alone.
Does all-electric heating need backup heat?
That depends on the home’s load, selected equipment, local design conditions and system strategy. Where supplementary heat is needed, an all-electric plan uses an appropriate electric arrangement.
Will my bills be lower than gas?
That cannot be promised from the equipment type alone. Costs depend on rates, heat-pump performance, water temperatures, loads and supplementary heat use. We discuss the assumptions relevant to your home.
Is a heat pump paired with a gas furnace all-electric?
No. That is a dual-fuel arrangement when the gas furnace is part of the heating plan. You can compare it with an all-electric option, but the terms describe different configurations.
Does changing my heating system remove every gas appliance?
No. Domestic water heating, fireplaces or other gas equipment may remain unless they are part of the agreed conversion scope. Confirm the complete plan before arranging any gas-service change.
Where does Climate Experts provide these services?
We serve residential and light commercial customers in Pickering, Ajax, Whitby, Oshawa, Scarborough, Toronto, Markham, Richmond Hill and Stouffville. Our team operates from our Pickering location; we do not work on condos, pool heaters or duct cleaning.
Your next step
Your local team for a thoughtful heating change.
Whether you want to keep the feel of hydronic heating or compare an all-electric replacement for an older forced-air system, we would be pleased to hear what you have in mind. Tell us about your home, the equipment you have and the priorities that matter most. We will help turn that starting point into a practical conversation about comfort, scope and budget.
Climate Experts Heating & Cooling Inc. was founded by Cody Johnson in 2012 and operates from Unit 13, 905 Dillingham Rd, in Pickering. We are proud of our community roots, experienced local team and five-star customer feedback. Our aim is to make a significant equipment decision feel clear and manageable, with workmanship we can stand behind.
Meet Climate Experts → · See Our Reviews →
Emergency? Call 905-492-7171. Emergency service is available after hours, evenings and weekends.
