Authorized GE dealer
GE HVAC dealer in Pickering — furnaces, heat pumps & ductless
Climate Experts is an authorized GE dealer serving Pickering, Durham Region and Toronto. Compare GE Appliances heating and cooling with a focus on the equipment match, controls, installation scope and support you need, whether you are replacing a furnace or adding ductless comfort to a room.
- Locally owned since 2012
- Emergency service within 24 hours
- Financing available
Get your free quote
Share a few details about your home. We will arrange an assessment and a clear, written quote.
Prefer to talk?
905-492-7171
GE equipment: compare the system, not just the badge
Some GE models shown here are legacy references. The reviewed official pages mark the named NS18H Connect, Multilink and Caliber examples as no longer manufactured. Climate Experts confirms any current Canadian alternative and support before proposing equipment; these examples are not a promise of stock.
NF96 gas furnaces
For NF96, Climate Experts first separates the single-stage and two-stage models in your comparison so the quote describes the furnace you would actually receive. We review the venting route, condensate disposal and coil transition, then confirm the exact Canadian-supported model and warranty before placing an order.
Read specifications, model data and selection notes
| Specification | Published value | Rating basis |
|---|---|---|
| NF96U070S3B example | 70K BTU; 96% AFUE; single-stage; upflow/horizontal | Exact official model title; 3-ton denotes associated airflow class, not heating tonnage |
| NF96U090V5C example | 90K BTU; 96% AFUE; two-stage; upflow/horizontal | Exact official model title; 5-ton airflow class |
| Efficiency basis | AFUE describes gas-furnace fuel efficiency | Do not mix with heat-pump SEER2/HSPF2 ratings |
| Warranty context | GE ducted lineup advertises 10-year registered warranty and lifetime furnace heat-exchanger warranty | US lineup article, not verified Canadian model certificate |
Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.
NS18H Connect heat pumps
The side-discharge NS18H can be worth assessing where a Toronto lot leaves little outdoor space. Climate Experts checks the exact installation clearances, airflow path and winter drainage before treating a slim cabinet as a fit; we also confirm the available model revision and the indoor match that supports your proposed heating plan.
Read specifications, model data and selection notes
| Specification | Published value | Rating basis |
|---|---|---|
| Verified outdoor example | NS18H24HA5; 2-ton nominal; side-discharge inverter | Exact model title |
| Family size options | 2, 3 and 4/5 tons | Official Connect article; not complete model suffix list |
| Family efficiency | Up to 19 SEER2; 10 HSPF2 | Family maxima; no exact indoor match or HSPF2 region verified |
| Refrigerant / control | R-454B; standard 24 V thermostats; dual-fuel compatible | Family article, compatibility must be verified |
| NS18H24HA5 cabinet | 30.13 × 40.19 × 17.13 in H × W × D | Exact outdoor model |
| Published model status | Official US model page says no longer being manufactured | Availability requires distributor confirmation; no Canadian stock claim |
Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.
Multilink ductless
For a Multilink project, Climate Experts looks at which rooms call for heating or cooling at the same time, rather than simply adding room-unit nameplate sizes. We plan the branch piping and individual drains and obtain the permitted indoor combination before using a two-zone outdoor unit in your proposal.
Read specifications, model data and selection notes
| Specification | Published value | Rating basis |
|---|---|---|
| Verified outdoor example | ASH218JCDDA; two zones; 18,000 BTU nominal | Exact outdoor model title; room-unit combinations not verified |
| Electrical supply | 208–230 V | Exact official model title; no breaker/MCA claim |
| ASH218JCDDA cabinet | 27.625 × 35 × 13.5 in H × W × D | Exact official product page |
| Published model status | Official US page says no longer being manufactured | Legacy example; Canadian stock/current replacement unverified |
Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.
Caliber single-zone ductless
For a Caliber single-zone unit, Climate Experts starts with the addition, office or bedroom that needs independent comfort. We assess the indoor wall location, outdoor service access and drain route, then verify the current indoor/outdoor pair and circuit requirements instead of assuming a 115 V model can use any existing outlet.
Read specifications, model data and selection notes
| Specification | Published value | Rating basis |
|---|---|---|
| Verified outdoor example | 1G09CB1BEA; 9,000 BTU nominal; 115 V | Exact official outdoor model title |
| 1G09CB1BEA cabinet | 21.75 × 34 × 11 in H × W × D | Exact outdoor model page |
| 2025 Caliber family | 9/12K 115 V options with basepan heater; 9/12/18/24K 230 V highwall options | Official 2025 lineup graphic; not exact full model list |
| 2025 family efficiency / refrigerant | Up to 20 SEER2; 9.5 HSPF2; R-454B | Family maxima from visually checked Caliber column; no exact indoor/outdoor match verified |
| Published example status | 1G09CB1BEA official US page says no longer being manufactured | Current revision and Canadian supply require verification |
Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.
Maximum efficiency ratings apply to specific tested combinations. Your proposal identifies the matched indoor and outdoor equipment; an operating-temperature limit does not guarantee full heating capacity at that temperature.
Choosing GE for your home
For a home with existing GE equipment, Climate Experts reviews the exact model, condition and available support before discussing repair or replacement. Legacy reference specifications help identify what is installed; any replacement proposal names a currently confirmed Canadian system.
When comparing a GE furnace and heat pump with other brands, we look at the existing duct system, electrical supply and how the heat sources will be controlled. An inverter heat pump adjusts its output; a single-stage air conditioner serves a simpler cooling role. We help you choose the approach that fits your home rather than adding features you will not use.
Before equipment is ordered
We review the heating and cooling requirements, installation access and service space. The written proposal names the equipment, controls and agreed work.
When the installation is complete
We commission the system, explain the controls and maintenance, and document the applicable registration and warranty details.
Get a clear, written quote for your GE system.
Free in-home assessment · Financing available through Financeit · Ask us about current rebates and manufacturer offers.
GE warranty: parts, equipment and labour
Coverage depends on the exact equipment, Canadian certificate, installation and registration. Parts, heat exchangers, equipment replacement and labour are separate benefits. Read the family-specific terms above; our written proposal identifies the coverage for your selected system.

Current GE offers and rebate planning
Manufacturer promotions change by model, location and dealer participation. Ask us to check any current Canadian offer against your exact system and purchase date; we show confirmed eligibility and expiry dates in the written proposal.
This dated manufacturer offer has ended or has not yet started. Contact us for current Canadian offers.
For heat-pump projects, review Ontario rebate planning before purchase. Program eligibility is separate from a manufacturer promotion.
Manufacturer information checked October 5, 2026.
Your GE system, supported by a local team
Pickering roots. Toronto and Durham service.
Climate Experts was founded by Cody Johnson in 2012. Cody brings 20 years of HVAC experience, with G2, 313D and 308R licences. Our shop is at Unit 13, 905 Dillingham Rd, Pickering. Office hours are Monday–Friday, 8 a.m.–5 p.m., with emergency service evenings and weekends.
Explore our team, our work and customer reviews.
Equipment information from your local team
Stay with Climate Experts while you compare the equipment. We explain the proposed models, installation scope and maintenance, and provide the applicable product and warranty documents for your selected system.
Ask Climate Experts for the equipment detailsFurnace replacement
Central heat-pump systems
Ductless heating and cooling
Our customers. Our community.
Proud of our work. Grateful for your reviews.
Our five-star customer reviews are a source of pride for Climate Experts. We want the experience behind our name to reflect the care we put into the work.
GE questions homeowners ask
Still have a question?
Call 905-492-7171 and tell us what you need. Our team will explain the next step and confirm availability.
Is GE ductless the same as a central heat pump?
No. Ductless equipment supplies compatible indoor room units; a central heat pump works with a ducted indoor unit. We compare the approaches around the existing home and the rooms that need conditioning.
How do I compare GE inverter and single-stage equipment?
An inverter varies compressor output, while a single-stage unit operates at one cooling level. We compare comfort, controls and the exact rated match as well as the installation scope.
Is labour included in a GE manufacturer warranty?
Do not assume so. Published parts and compressor coverage is separate from labour. We identify any labour allowance or Climate Experts labour protection in the written proposal.
Can you confirm the current Canadian model before I commit?
Yes. The proposal identifies the distributor-supported model, compatible indoor unit, refrigerant and applicable Canadian warranty before ordering.
What is included in a GE installation quote?
The quote identifies the selected equipment and controls, installation scope, applicable warranty and any confirmed rebates. Tell us about comfort problems, planned renovations and access restrictions so those needs can be assessed before the scope is agreed.
Can you maintain my GE system after installation?
Contact our Pickering service team for maintenance planning. The visit and schedule depend on the equipment, its condition and the manufacturer’s requirements. Maintenance 365 options can be reviewed with the specific systems you want covered.
Your next step
Talk to a Climate Expert about GE
Tell us where you live, what equipment you have and what you want to improve. We will discuss the assessment and system options for your home.
Emergency? Call 905-492-7171. Emergency service is available after hours, evenings and weekends.
