Climate Experts · Other HVAC services
Ductwork, gas lines, ventilation & thermostats.
Comfort depends on more than the equipment in your basement. The air needs a clear path through your home, your controls need to suit the system, and each connection needs careful planning. Whether you are renovating, connecting a gas appliance or trying to make an uncomfortable room more usable, your local Climate Experts team can help you understand the work involved.
- Locally owned since 2012
- Emergency service within 24 hours
- Financing available
Get your free quote
Share a few details about your home. We will arrange an assessment and a clear, written quote.
Prefer to talk?
905-492-7171
The details behind a comfortable, well-planned home.
You may know exactly what you need—a gas connection for a new appliance or a replacement thermostat. Sometimes the starting point is a problem: a bedroom that never feels comfortable, a renovation that changes the ductwork, or a bathroom where moisture lingers. We begin with what you are experiencing and look at how the proposed work fits the rest of your home.
Climate Experts has served our community from Pickering since 2012. Our local team brings practical heating, cooling and mechanical experience to work that homeowners often cannot see once the walls are finished. We take pride in explaining the scope clearly and giving these details the same attention as an equipment installation.
Ductwork for custom homes, renovations & repairs.
A good furnace or air conditioner still needs ductwork that can deliver and return air effectively. If one area is consistently too warm or too cold, we look at the supply and return arrangement, accessible duct condition and the equipment serving the space. A larger unit is not automatically the answer to an airflow problem.
Renovations, additions and basement work can change where ducts need to run. We review the proposed layout, available routes, access and the effect on existing rooms before quoting alterations. Where work involves finished spaces, we discuss what needs to be opened and identify the responsibility for any related repair or finishing.
Custom-home ductwork, planned before the walls close.
For a custom home, ductwork layout belongs in the early planning conversation. Climate Experts works with you and your builder before the HVAC design phase to understand your comfort priorities, equipment preferences and budget. We then coordinate the installation layout with the mechanical design, reviewing supply and return routes, equipment locations, ceiling space and access alongside the other trades.
That early attention helps identify where bulkheads or duct chases may be needed, how they affect the rooms, and whether a different equipment arrangement is worth considering. We explain the practical choices before rough-in so you can make informed decisions about both the comfort system and the finished home.
Renovations, additions & basement alterations.
In an existing home, we consider the part being renovated and the rooms that still depend on the original system. From small additions to basement-underpinning HVAC work, our experience helps us plan duct changes around available space and construction access. We discuss what can be retained, what needs to move and how the proposed layout fits the equipment serving the home.
New or altered duct routes
Plan supply and return connections around the rooms being changed, with attention to practical routing and the existing system.
Airflow concerns
Review the affected rooms and accessible ductwork together rather than treating every comfort complaint as an equipment failure.
Duct repairs
Assess damaged, disconnected or otherwise problematic accessible sections and explain the proposed repair and access requirements.
Tell us which rooms are affected and whether the problem changes with the season. Photos of accessible ductwork and a simple renovation layout can help us prepare for the conversation. Our ductwork service does not include duct cleaning.
Get a clear, written quote for your HVAC project.
Free in-home assessment · Financing available through Financeit · Ask us about current rebates and manufacturer offers.
Fire dampers & fire-separation coordination.
When ductwork passes through a rated wall or floor, the required protection depends on the assembly and the approved project details. A fire damper is different from an ordinary airflow-balancing damper; it cannot be selected simply because it fits the duct opening.
Climate Experts can review the HVAC work and coordinate the specified fire-damper requirements with the project team. The installation must suit the rated assembly, the product’s listed arrangement and manufacturer instructions. Location, orientation, access and the surrounding construction all matter, so these details should be addressed while you plan your HVAC installation.
For alterations involving apartments or multiple dwelling units, bring the relevant plans and fire-separation details to the discussion. We identify the mechanical scope and coordination needed; drawings, approvals and the responsibilities of other trades remain part of the overall project. An installed damper by itself does not establish that an entire wall, floor or building meets its required rating.
Exhaust ventilation that suits the space.
If a bathroom stays damp or an exhaust fan seems ineffective, the issue may involve the fan, duct route, outdoor termination or how the system is used. Choosing a stronger fan without reviewing the complete arrangement can leave the original problem unresolved.
We assess suitable exhaust ventilation for the home or light commercial space and explain the proposed fan, ducting, controls and discharge arrangement. Tell us what the room is used for, what is already installed and whether the work is part of a renovation. That helps us determine the appropriate scope before equipment is selected.
Fan & duct arrangement
Review the intended airflow, available routing and outdoor termination as part of one installation.
Controls & everyday use
Choose suitable switching or control options and explain how to use them for the space’s needs.
The rest of the home
Consider how the exhaust arrangement interacts with ventilation and combustion equipment where relevant.
Whole-home fresh-air systems have a different role from a local exhaust fan. If you are considering an HRV, ERV, filtration or humidity equipment, our Indoor Air Quality page explains those options separately. We will confirm the scope of any specialized exhaust enquiry rather than assuming every application is the same.
Main gas lines: plan for the appliances they serve.
Adding or changing gas equipment can affect the piping that serves several appliances. Climate Experts reviews the proposed in-property gas distribution work in the context of the connected equipment, route, distance and available supply conditions. An existing line is not automatically suitable for a new combination of appliances.
Gas-line planning for custom homes & renovations.
For a custom home, we discuss the appliances you intend to install while equipment selections and budgets are still being developed. The planned gas furnace, boiler, fireplaces, water heater and garage heater can affect the distribution layout. Reviewing them together helps us coordinate practical routes and connection locations with your builder and the project team before rough-in.
For renovations and additions, we assess the existing gas piping alongside the equipment being added, replaced or relocated. A change in appliance demand or location may require more than extending the nearest line. We explain the proposed alterations and access requirements before you approve the scope.
Share the equipment you have now and what you intend to add or replace. We review the relevant appliance inputs and installation requirements before proposing the piping work. If a utility supply or meter matter needs attention, that responsibility is identified separately from the gas piping within your property.
Here, “main gas lines” means the property’s distribution piping within our agreed scope. Utility-owned street mains, supply infrastructure and meter work are not assumed to be included. Your proposal makes the work, access and any necessary coordination clear.
Explore our custom-home consulting and installation process →
Appliance gas lines & connections.
A furnace, boiler, fireplace, water heater or garage heater needs a gas connection appropriate to the selected appliance and the installed supply arrangement. We review the exact equipment, intended location and existing piping before confirming the work. A nearby connection does not, on its own, tell us whether the installation is suitable.
This is particularly useful when you are replacing equipment with different requirements or moving an appliance during a renovation. Tell us the model if you have selected one, and share photos of the location and accessible piping. We can then explain the assessment and the connection work proposed for your project.
For new homes, we coordinate the planned appliance connections with the equipment locations and rough-in schedule. During a renovation, we review connections that need to move or change with the layout. Selecting the appliance before the connection is finalized helps keep the piping proposal aligned with the equipment you actually intend to use.
Gas work should be completed by appropriately qualified professionals. We keep the conversation focused on the installation you need, the agreed scope and the checks appropriate to that work; this page is not a guide to altering gas piping yourself.
Thermostat installation, replacement & support.
The right thermostat is one you can use comfortably and that works with the system in your home. Basic, programmable, Wi-Fi and manufacturer-specific communicating controls have different capabilities. Before recommending a replacement, we review the equipment, heating and cooling stages, wiring and any connected accessories.
If your current thermostat is difficult to use or the system is not responding as expected, tell us what happens when you change the settings. We assess whether the concern involves the control, its setup or the equipment it operates. Replacing a thermostat cannot automatically correct a ductwork, equipment or room-layout problem.
A suitable control
Match the thermostat to the installed system and the features you will actually use.
Installation & setup
Confirm compatible connections and configure the control for the equipment and agreed accessories.
A homeowner walkthrough
Explain everyday settings and schedules, and help you understand the applicable app or remote-control functions.
Hydronic and radiant floors need controls suited to their application. Where appropriate, we use thermostats with slab sensors to manage floor temperature and support comfort. Zoning and specialized controls need a compatible system design; a thermostat alone does not create independently controlled zones.
A clear scope, a clear price, a local team.
Whether the job is a thermostat replacement or a larger ductwork and gas-line alteration, you should understand what is being proposed. We discuss the need, review the installation and explain the work before you make a decision.
1. Share what you need
Tell us your location, the problem or renovation plans, and the equipment involved. Photos can help us understand the starting point.
2. Review the practical details
Assess access, routing, compatibility and any related trade work or project requirements.
3. Approve the proposal
Your installation proposal identifies the included work and fixed price. There are no hidden fees or additional costs for that approved quoted scope.
4. Complete & explain the work
Check operation as appropriate to the installation and explain the controls or changes relevant to your home.
If you need a repair, we explain the findings and proposed work before agreed repairs proceed. For ongoing care, ask about Maintenance 365 for your eligible heating and cooling equipment. Specialized equipment or additional work is confirmed separately; the base plan does not automatically cover every service listed on this page.
Financing is subject to credit approval. Review the offered terms and total borrowing costs before accepting an agreement.
Our customers. Our community.
Proud of our work. Grateful for your reviews.
Our five-star customer reviews are a source of pride for Climate Experts. We want the experience behind our name to reflect the care we put into the work.
Questions about these HVAC services.
Still have a question?
Call 905-492-7171 and tell us what you need. Our team will explain the next step and confirm availability.
Do you plan ductwork and gas lines for custom homes?
Yes. Climate Experts offers early consulting before the HVAC design phase, followed by coordination of the installation layout with the mechanical design, builder and other trades. We review equipment selections, supply and return routes, gas appliance requirements and the budget before the agreed work proceeds.
Can you alter ductwork and gas lines during a renovation?
Yes. We review the existing system, the proposed layout and the equipment being added or moved. The proposal explains the alterations, access and related coordination so the work fits both the renovated space and the parts of your home that remain.
Do you install and repair ductwork in existing homes?
Yes. We review accessible ductwork, the affected rooms and the existing equipment to propose suitable installation, modifications or repairs. Renovation access and any related finishing work are discussed in the scope.
Can ductwork changes help an uncomfortable room?
They may help when the supply or return arrangement is contributing to the issue. We assess the room and system before recommending work; the cause may also involve the equipment, controls or other characteristics of the space.
Do you offer duct cleaning?
No. Climate Experts offers ductwork installation, alterations and repairs, but does not provide duct cleaning.
Is a fire damper the same as a balancing damper?
No. A balancing damper adjusts airflow. A fire damper has a different protective role and must suit the specified assembly and installation requirements. We review the project details before proposing the mechanical work.
Can you add a gas line for a new appliance?
We can review the enquiry and assess the appliance, location and supply arrangement. The selected equipment and existing piping determine the proposed connection work; an existing line is not automatically suitable.
Do you change utility gas mains or meters?
Utility infrastructure and meter matters are separate from our agreed in-property gas piping scope. If utility coordination is needed, the proposal identifies that distinction.
Will any Wi-Fi thermostat work with my furnace or heat pump?
No. Compatibility depends on the equipment, stages, wiring, controls and connected accessories. We review those details before recommending a thermostat.
Do you offer thermostats for radiant in-floor heating?
Yes. Appropriate radiant-floor installations can use thermostats with slab sensors. We review the heating arrangement and control requirements as part of the proposed work.
Does an exhaust fan replace an HRV or ERV?
They have different roles. A local exhaust fan removes air from a particular area, while an HRV or ERV provides a coordinated fresh-air ventilation arrangement. We can explain the appropriate option for your enquiry.
Where do you provide these services?
Our Pickering-based team serves Pickering, Ajax, Whitby, Oshawa, Scarborough, Toronto, Markham, Richmond Hill and Stouffville. We work with residential and light commercial customers; we do not work on condos or pool heaters.
Your next step
Your local team for the work behind everyday comfort.
You do not need to know the technical name of the problem before you call. Tell us about the room that is uncomfortable, the appliance you want to connect or the renovation you are planning. We will ask the practical questions that help us understand your home and explain the next step clearly.
Climate Experts operates from Unit 13, 905 Dillingham Rd, in Pickering. Founded by Cody Johnson in 2012, we are proud of our local roots, the people on our team and the five-star feedback our customers have shared. We want the care in our workmanship to be matched by a helpful, professional experience from the first conversation.
Meet Climate Experts → · See Our Reviews → · Explore Maintenance 365 →
Emergency? Call 905-492-7171. Emergency service is available after hours, evenings and weekends.
