Skip to content

Based in Pickering · Serving Durham, York & Toronto

FinancingPromotions
 

Authorized IBC dealer

IBC boiler dealer in Pickering — hydronic heating for Toronto & Durham

Climate Experts plans IBC boiler systems for radiator homes, in-floor heating, hydronic air handlers and custom-home projects across Pickering, Durham Region and Toronto. We start with heat loss, water temperatures and zoning so the boiler and the distribution work together.

  • Locally owned since 2012
  • Emergency service within 24 hours
  • Financing available
★★★★★Read our Google reviews
Free in-home assessment

Get your free quote

Share a few details about your home. We will arrange an assessment and a clear, written quote.

This field is for validation purposes and should be left unchanged.
Name(Required)
Phone(Required)
    Address(Required)
    The address where the work would be done.
    The age of your current equipment, any problems you have noticed, rooms that are too hot or cold – anything that helps us prepare an accurate quote.

    Prefer to talk?
    905-492-7171

    IBC equipment: compare the system, not just the badge

    These manufacturer-published families are a starting point for a proposal. We confirm Canadian distributor availability, the exact model and capacity, and the equipment we recommend for your home before ordering.

    SL Series G3

    Climate Experts compares the smallest active zone with the boiler’s minimum output, then checks the water temperature needed by radiators, floors or fan coils. For a home that also needs an indirect cylinder, we size the storage and recovery separately and plan how the boiler changes between heating and tank calls.

    Read specifications, model data and selection notes
    Published technical data
    ApplicationHeating boiler; indirect domestic water requires separate tank.
    ControlsV-10 touchscreen; outdoor reset; 0–10VDC or 4–20mA control input.
    Limited warranty — conditions applyFor post-July2024 manufacture, residential all parts 100% years0–5; heat exchanger 100% years6–10 and25% years11+. Original owner/location, authorized distribution, qualified installation, registration and maintenance conditions; labour excluded. Do not describe lifetime coverage as full replacement for life.
    SL 10-85G3
    Published technical data
    ModelSL 10-85G3
    Heating input, minimum–maximum (BTU/h)10600 – 85000
    CSA output, minimum–maximum (BTU/h)10100 – 79000
    AFUE (%)96
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)54
    SL 14-115G3
    Published technical data
    ModelSL 14-115G3
    Heating input, minimum–maximum (BTU/h)14000 – 115000
    CSA output, minimum–maximum (BTU/h)13300 – 109000
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)72
    SL 20-160G3
    Published technical data
    ModelSL 20-160G3
    Heating input, minimum–maximum (BTU/h)20000 – 160000
    CSA output, minimum–maximum (BTU/h)19000 – 147000
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)82
    SL 30-199G3
    Published technical data
    ModelSL 30-199G3
    Heating input, minimum–maximum (BTU/h)32000 – 199000
    CSA output, minimum–maximum (BTU/h)30000 – 181300
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)100

    Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.

    Discuss SL Series G3 with Climate Experts

    VX residential boilers

    For VX, Climate Experts checks the load of the whole home and of the smallest zone before choosing among the three firing ranges. We also inspect the retained piping and allow access to the heat exchanger, pumps and venting so a compact wall installation remains practical to maintain.

    Read specifications, model data and selection notes
    Published technical data
    ApplicationHeating boiler; separate indirect tank may supply domestic hot water.
    ControlsV-10 touchscreen, outdoor reset, four zone pump/valve control plus primary pump; cascade up to four.
    Limited warranty — conditions applyResidential: other parts5 years; heat exchanger100% years0–10,25% years11–15. Commercial heat exchanger5 years/other parts2 years. Original owner and location; qualified trained installer; maintenance/water-quality requirements. Labour excluded.
    VX110
    Published technical data
    ModelVX110
    Heating input, minimum–maximum (BTU/h)16900 – 110000
    CSA output, minimum–maximum (BTU/h)16200 – 101500
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)90
    VX150
    Published technical data
    ModelVX150
    Heating input, minimum–maximum (BTU/h)23000 – 150000
    CSA output, minimum–maximum (BTU/h)22000 – 138500
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)79
    VX199
    Published technical data
    ModelVX199
    Heating input, minimum–maximum (BTU/h)30600 – 199000
    CSA output, minimum–maximum (BTU/h)29200 – 183700
    AFUE (%)95
    Electrical120VAC/60Hz
    Full-fire power without pumps (W)90

    Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.

    Discuss VX residential boilers with Climate Experts

    SFC-1 Superflow combi

    Climate Experts checks two separate requirements for an SFC combi: the heating load and the hot water used at the same time. We compare the published flow at a realistic winter temperature rise with your fixtures, then review recirculation and whether storage would better suit long or overlapping draws.

    Read specifications, model data and selection notes
    Published technical data
    ControlsTouchscreen, outdoor reset, 0–10VDC input, DHW recirculation pump relay; ECM heating pump packaged with boiler.
    Limited warranty — conditions applySingle residential unit: heat exchanger10 years and other parts5 years. Commercial heat exchanger5 years/parts5 years. Original owner/location, qualified installation, normal use and maintenance/water quality apply; labour excluded.
    SFC99-1
    Published technical data
    ModelSFC99-1
    Heating input, minimum–maximum (BTU/h)15500 – 99000
    Csa heating output BTU/h min max14800 – 89000
    Domestic hot-water input, minimum–maximum (BTU/h)15500 – 99000
    AFUE (%)96
    Domestic hot water US gpm at 67F 37 2C rise2.4
    Electrical120VAC/60Hz;120W full fire including internal pump
    SFC125-1
    Published technical data
    ModelSFC125-1
    Heating input, minimum–maximum (BTU/h)16500 – 99000
    Csa heating output BTU/h min max15800 – 89000
    Domestic hot-water input, minimum–maximum (BTU/h)16500 – 125000
    AFUE (%)95
    Domestic hot water US gpm at 67F 37 2C rise3.2
    Electrical120VAC/60Hz;120W full fire including internal pump
    SFC199-1
    Published technical data
    ModelSFC199-1
    Heating input, minimum–maximum (BTU/h)28500 – 125000
    Csa heating output BTU/h min max27100 – 111000
    Domestic hot-water input, minimum–maximum (BTU/h)28500 – 199000
    AFUE (%)95
    Domestic hot water US gpm at 67F 37 2C rise5.0
    Electrical120VAC/60Hz;120W full fire including internal pump

    Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.

    Discuss SFC-1 Superflow combi with Climate Experts

    EBX electric boilers

    Climate Experts checks the available electrical service and supply voltage before selecting EBX. The same model delivers less heat at208V than at240V; we compare that available output with the heat loss and planned water temperature, and size any heat-pump backup arrangement around the actual shortfall.

    Read specifications, model data and selection notes
    Published technical data
    ControlsSetpoint or outdoor reset; built-in three-speed pump; dual titanium elements.
    Limited warranty — conditions applyResidential pump/elements1 year, other parts5 years; commercial1 year. Original owner/location; licensed trained contractor; electrical and water-quality conditions apply. Labour excluded.
    EBX 4K-240
    Published technical data
    ModelEBX 4K-240
    Modulating power kW at240V min max0.4 – 4
    Modulating power kW at208V min max0.3 – 3
    Max current A at240V with pump17.6
    Published breaker A30
    Electrical noteFinal conductor/protection installation follows selected manual and applicable code.
    EBX 8K-240
    Published technical data
    ModelEBX 8K-240
    Modulating power kW at240V min max0.8 – 8
    Modulating power kW at208V min max0.6 – 6
    Max current A at240V with pump34.2
    Published breaker A45
    Electrical noteFinal conductor/protection installation follows selected manual and applicable code.
    EBX 10K-240
    Published technical data
    ModelEBX 10K-240
    Modulating power kW at240V min max1 – 10
    Modulating power kW at208V min max0.8 – 7.5
    Max current A at240V with pump42.6
    Published breaker A60
    Electrical noteFinal conductor/protection installation follows selected manual and applicable code.
    EBX 12K-240
    Published technical data
    ModelEBX 12K-240
    Modulating power kW at240V min max1.2 – 12
    Modulating power kW at208V min max0.9 – 9
    Max current A at240V with pump50.9
    Published breaker A70
    Electrical noteFinal conductor/protection installation follows selected manual and applicable code.

    Manufacturer documentation reviewed October 20, 2026. Exact Canadian availability, production suffix and installation requirements are confirmed with your proposal.

    Discuss EBX electric boilers with Climate Experts

    Published ratings apply to particular models and test conditions. Your Climate Experts proposal identifies the selected equipment and installation requirements; we confirm the applicable Canadian specifications before ordering.

    Choosing IBC for your home

    IBC boilers support projects where the distribution system matters as much as the boiler itself: cast-iron radiators, in-floor heating, hydronic air handlers and snow melt. In Toronto renovations, we assess the retained piping and emitters before choosing the new heat source. A large boiler is not a substitute for a balanced system.

    For a custom home, we plan zones, water temperatures, controls and domestic hot water together. An electric boiler requires an electrical-capacity review; a gas boiler requires suitable fuel and venting arrangements. We explain the system options before mechanical drawings are finalized, including how service access and future maintenance will work.

    Before equipment is ordered

    We review the heating and cooling requirements, installation access and service space. The written proposal names the equipment, controls and agreed work.

    When the installation is complete

    We commission the system, explain the controls and maintenance, and document the applicable registration and warranty details.

    Get a clear, written quote for your IBC system.

    Free in-home assessment · Financing available through Financeit · Ask us about current rebates and manufacturer offers.

    IBC warranty: parts, equipment and labour

    Coverage depends on the exact equipment, Canadian certificate, installation and registration. Parts, heat exchangers, equipment replacement and labour are separate benefits. Read the family-specific terms above; our written proposal identifies the coverage for your selected system.

    Ibc SL 14-115 G3 boiler appliance

    Current IBC offers and rebate planning

    Manufacturer promotions change by model, location and dealer participation. Ask us to check any current Canadian offer against your exact system and purchase date; we show confirmed eligibility and expiry dates in the written proposal.

    For heat-pump projects, review Ontario rebate planning before purchase. Program eligibility is separate from a manufacturer promotion.

    Manufacturer information checked October 5, 2026.

    Your IBC system, supported by a local team

    Pickering roots. Toronto and Durham service.

    Climate Experts was founded by Cody Johnson in 2012. Cody brings 20 years of HVAC experience, with G2, 313D and 308R licences. Our shop is at Unit 13, 905 Dillingham Rd, Pickering. Office hours are Monday–Friday, 8 a.m.–5 p.m., with emergency service evenings and weekends.

    Explore our team, our work and customer reviews.

    Equipment information from your local team

    Stay with Climate Experts while you compare the equipment. We explain the proposed models, installation scope and maintenance, and provide the applicable product and warranty documents for your selected system.

    Ask Climate Experts for the equipment details

    Boiler systems
    Radiant hydronic heating
    Custom-home HVAC consulting

    Our customers. Our community.

    Proud of our work. Grateful for your reviews.

    Our five-star customer reviews are a source of pride for Climate Experts. We want the experience behind our name to reflect the care we put into the work.

    Google reviews★★★★★Climate Experts Heating & Cooling
    Posted on Google Google
    Warren profile picture
    Warren
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Garry from Climate Experts was amazing. Diagnosed and fixed the issue within seconds. Also, went above and beyond with a few little extras. Thank you!
    Posted on Google Google
    Lee Oattes profile picture
    Lee Oattes
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    I asked Climate Experts to install an ERV system for our home. The team was very responsive and I had great support from Cory and Robert to set up a site visit and get a quote promptly. They were also able to schedule installation quickly. Robert and Ocean did a great job with the installation working with me to get the system configured and installed just the way I wanted. I'd recommend this team for your HVAC needs.
    Posted on Google Google
    Bob Rayner profile picture
    Bob Rayner
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Evan Ferreira from Climate Experts in Pickering/GTA services both my and my son-in-laws furnace and air conditioner. He is cheerful, thorough, knowledgeable and informative . Thanks Evan.
    Posted on Google Google
    Michael O1117 profile picture
    Michael O1117
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Tarique did a great job on my furnace. He detected the problem promptly and fixed it very efficiently. I'll ask for him in the future if my furnace needs to be repaied in the future.
    Posted on Google Google
    k HB profile picture
    k HB
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Evan was kind, professional and taught me about my furnace. Fixed a leak for me. Appreciate all he did for me.
    Posted on Google Google
    Sean Hunter profile picture
    Sean Hunter
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    We had our furnace stop working one evening. Called the same evening and a service technician (Danish) showed up the very next day. He provided amazing customer service and spent the time to explain what the issues were and our options to fix it. I highly recommend Climate Experts for anyone looking for a reliable service to take care of your heating and cooling needs for your home.
    Verified by Trustindex
    Trustindex verified that these reviews were published on Climate Experts Heating & Cooling Inc.'s Google Business Profile. Learn more

    IBC questions homeowners ask

    Still have a question?

    Call 905-492-7171 and tell us what you need. Our team will explain the next step and confirm availability.

    Can one IBC boiler serve radiators and in-floor heating?

    Potentially, with a design that supplies the water temperatures and flow each circuit needs. We plan zone controls, pumps and any mixing arrangement around the emitters.

    Why does the boiler’s minimum output matter?

    When one small zone calls for heat, an oversized minimum output can cause short cycling. We compare the boiler’s modulation range with the smallest likely heating demand.

    Is an EBX electric boiler the same as an air-to-water heat pump?

    No. EBX is electric resistance heating. A heat pump moves heat and has different efficiency, output and installation requirements. We compare electrical capacity and running-cost assumptions before selecting an all-electric approach.

    Can you review the hydronic design before my renovation drawings are final?

    Yes. Early consulting covers mechanical space, zones, piping, domestic hot water, controls and service access, helping the system fit the building and budget.

    What is included in a IBC installation quote?

    The quote identifies the selected equipment and controls, installation scope, applicable warranty and any confirmed rebates. Tell us about comfort problems, planned renovations and access restrictions so those needs can be assessed before the scope is agreed.

    Can you maintain my IBC system after installation?

    Contact our Pickering service team for maintenance planning. The visit and schedule depend on the equipment, its condition and the manufacturer’s requirements. Maintenance 365 options can be reviewed with the specific systems you want covered.

    Your next step

    Talk to a Climate Expert about IBC

    Tell us where you live, what equipment you have and what you want to improve. We will discuss the assessment and system options for your home.

    Emergency? Call 905-492-7171. Emergency service is available after hours, evenings and weekends.