Loading...

Mitsubishi FH-Series 15k BTU Wall Mounted Unit – For Multi or Single-Zone

SKU: MSZ-FH15NA Categories: ,

$0.00

For over 50 years, Mitsubishi has remained at the forefront of the mini split industry thanks to their dedication to providing efficient, user-friendly comfort solutions. The MSZ-FH15NA is a wall mounted heat pump mini split indoor unit for use in single zone and multi-zone systems. The functional design is paired with quiet operations that provide comfort without disrupting your space and installing a Mitsubishi wall mounted indoor unit is quick and easy thanks to their convenient mounting plate. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room. Whether you are designing a primary heating and cooling system or supplementing an existing one, the MSZ-FH15NA is an excellent addition.

Features

For over 50 years, Mitsubishi has remained at the forefront of the mini split industry thanks to their dedication to providing efficient, user-friendly comfort solutions. The MSZ-FH15NA is a wall mounted heat pump mini split indoor unit for use in single zone and multi-zone systems. The functional design is paired with quiet operations that provide comfort without disrupting your space and installing a Mitsubishi wall mounted indoor unit is quick and easy thanks to their convenient mounting plate. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room. Whether you are designing a primary heating and cooling system or supplementing an existing one, the MSZ-FH15NA is an excellent addition.
    • Advanced Filtration System
    • The MSZ-FH15NA uses two advanced filters to clean and deodorize the circulated air. The deodorizing filter absorbs any offending smells, while the second is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.
    • i-see Sensor 3D
    • The MSZ-FH15NA’s i-see Sensor 3D monitors its zone for fluctuations in temperature. If it detects an underserved area, the MSZ-FH15NA will temporarily direct airflow to that zone. It also enters energy saving mode if no human heat signatures are detected.
    • Hot-Start
    • Mitsubishi’s hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.
    • Powerful Mode
    • The powerful setting on the MSZ-FH15NA makes it easy to get your zone to the perfect temperature quickly. When activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.
    • Econo Cool Mode
    • By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZ-FH15NA can improve the efficiency of cooling operations without compromising the comfort provided.
    • Dehumidification
    • When the indoor unit runs in dry mode, the coil’s temperature stays just below the dew point of the return air, removing unwanted moisture. This improves comfort and reduces the chance of mold growth and other property damage in the conditioned space.
    • Vane Control
    • Optimal air flow can be achieved with the MSZ-FH15NA thanks to two vane control options, standard and wide. Auto mode selects the best vane position based on operating mode while swing mode cycles through each vane position.
    • Product Compatible With
    • Mitsubishi MXZ-3C24NA Mini-Split Outdoor Condenser
    • Mitsubishi MXZ-3C30NA Mini Split Outdoor Condenser
    • Mitsubishi MXZ-4C36NA Mini Split Outdoor Condenser
    • Mitsubishi MXZ-5C42NA Mini Split Outdoor Condenser
    • Mitsubishi MXZ-8C48NA Mini Split Outdoor Condenser
Product Note
This product requires a compatible outdoor condenser and the following accessories for indoor unit installation:
  • Line Set – This double insulated tubing transfers refrigerant efficiently between your outdoor condenser and indoor units.
  • Drain Tubing – Drain tubing facilitates the reliable and effective removal of condensate from your system. It connects your indoor units to drain locations of your choosing.
  • Connecting Wire – This durable, insulated wire provides power to your indoor units from your outdoor condenser.

Specifications

General Information
Type
Wall Mounted
Product Line
FH-Series
Operating Mode
Heating and Cooling
Multi-Zone Compatible
Yes
Refrigerant Type
R-410A
Remote Control
Wireless
Indoor Unit Size(s)
15
Installation Location
Indoor
Performance
Cooling BTU
15000
Cooling Capacity
15000 BTU
Maximum Air Flow
411 CFM
Minimum Air Flow
225 CFM
Minimum Sound Level
25 dB
Maximum Sound Level
46 dB
Moisture Removal
4 Pints/Hour
Electrical Data
Phase
1
Frequency
60 Hz
Dimensions
Gas Connection Size
1/2 Inch
Liquid Connection Size
1/4 Inch
Product Height
12 11/16 Inches
Product Width
36 7/16 Inches
Product Depth
9 3/16 Inches
Product Weight
29 Pounds
Shipping Weight
35 Pounds
Certifications
ETL Listed
Yes
Warranty Information
Parts Warranty
5 Years

Manuals